APV Replacement Gaskets by Model, Material & Sealing Design
Explore compatible aftermarket replacement gaskets for APV gasketed plate heat exchangers. Our model references include SR, B, Q, J, M, H, N, K, TR, LR and LD families, with additional variants requiring individual verification.
Find the correct gasket by checking the APV equipment model, plate groove, retention design, gasket compound and operating conditions. Browse products below or submit your replacement requirements for technical matching.
-
![APV Viton Gaskets]()
APV Viton GasketsFKM sealing material for selected chemicals, hydrocarbons, oils, and elevated-temperature duties.view more
Gasket profile matched to the specified APV plate and sealing-groove geometry.
Clip-on, snap-in, or glued configurations... -
![APV Plate Heat Exchanger Gaskets]()
APV Plate Heat Exchanger GasketsReplacement sealing gaskets for identified APV gasketed plate heat exchanger configurations.view more
Available in EPDM, NBR, FKM, and other confirmed elastomer compounds.
Profiles matched to plate grooves, port rings, vents, clips,... -
![APV Replacement Gaskets]()
APV Replacement GasketsReplacement gaskets for identified APV gasketed plate heat exchanger configurations.view more
Profile matching covers sealing grooves, port rings, vents, clips, and attachment points.
EPDM, NBR, and FKM materials selected according to... -
![APV Compatible Gaskets]()
APV Compatible GasketsCompatible replacement gaskets for identified APV gasketed plate heat exchanger configurations.view more
Plate-groove geometry, port rings, vents, and retaining features checked before production.
EPDM, NBR, and FKM compounds available... -
![APV EPDM Gaskets]()
APV EPDM GasketsEPDM replacement gaskets for identified APV gasketed plate heat exchanger configurations.view more
Commonly selected for water, hot-water, HVAC, and compatible aqueous duties.
Profiles matched to plate grooves, port rings, vents,... -
![APV NBR Gaskets]()
APV NBR GasketsNBR replacement gaskets for identified APV gasketed plate heat exchanger configurations.view more
Commonly evaluated for selected oils, greases, hydraulic fluids, and industrial utilities.
Profiles matched to plate grooves, port rings,...
Replacement Gaskets for APV Gasketed Plate Heat Exchangers
Select compatible aftermarket APV heat exchanger gaskets by identifying the complete exchanger model, gasket profile, sealing arrangement and operating conditions.
Our reference directory covers selected APV SR, B, Q, J, M, H, N, K, TR, LR, LD and additional equipment models.
APV Equipment Matching
Compare the full equipment designation and model suffix before selecting a gasket.
Elastomer Compatibility
Review EPDM, NBR, HNBR and FKM compound requirements for your process conditions.
Gasket Retention Design
Match the original groove, port rings and clip-on or bonded installation method.
APV Heat Exchanger Gasket Product References
Compare the following APV gasket product images with your existing components. The full sealing profile and correct model must be verified before ordering.
APV Replacement Gasket Models by Series
Browse selected model designations used for APV gasket replacement enquiries. Each reference is subject to component-level compatibility and availability checks.
APV SR Gaskets
Verify the exact SR suffix and corresponding plate.
APV B Gaskets
L and S model variants require separate verification.
APV Q and A Gaskets
Confirm QD/QE designation and matching gasket profile.
APV J and M Gaskets
Identify the complete model and original plate geometry.
APV H, N and K Gaskets
Distinguish standard, Paraclip and DuoSafety configurations when applicable.
APV TR, LR and LD Gaskets
Verify the suffix and port-sealing arrangement.
APV R-Series References
Confirm the original equipment and component type.
Paraclip / DuoSafety
Do not assume these configurations are interchangeable with standard versions.
Other APV References
Additional equipment identification references subject to individual review.
APV HC / VC Reference Dimensions
The following HC and VC values come from the supplied APV model reference data. Both columns are identified in millimetres.
| APV Model | HC (mm) | VC (mm) |
|---|---|---|
| A055 | 380 | 1056 |
| A085 | 380 | 1531 |
| QD030 | 310 | 742 |
| QD055 | 310 | 1237 |
| QE055 | 310 | 1237 |
| QE080 | 310 | 1756 |
| B063L | 486 | 1043 |
| B063S | 486 | 1043 |
| B110L | 486 | 1523 |
| B110S | 486 | 1523 |
| SR1 | 130 | 490 |
| SR2 | 180 | 700 |
| SR3 | 262 | 1022 |
| SR6AA | 314 | 2102 |
| SR6AG | 314 | 1891 |
| SR6GH | 314 | 833 |
| SR6GL | 314 | 1256 |
| SR14AD | 486 | 2003 |
| SR14AH | 486 | 1763 |
| SR14AN | 486 | 2243 |
| SR14AP | 486 | 1522 |
| SR14GD | 486 | 1043 |
| J060 | 465 | 915 |
| J092 | 465 | 1290 |
| J107 | 465 | 1480 |
| J185 | 465 | 2415 |
| M60 | 465 | 915 |
| M92 | 465 | 1290 |
| M107 | 465 | 1477 |
| M185 | 465 | 2415 |
| H12 | 150 | 738 |
| H17 | 150 | 918 |
| N25 | 238 | 794 |
| N35 | 238 | 1070 |
| N50 | 238 | 1484 |
| K34 | 310 | 832 |
| K55 | 310 | 1237 |
| K71 | 310 | 1552 |
| TR9AL | 409 | 2329 |
| TR9AV | 409 | 1817 |
| TR9GL | 409 | 1033 |
| TR9GN | 409 | 1465 |
| LR9GL | 409 | 1033 |
| LR9AL | 409 | 2329 |
| LD9AL | 409 | 2329 |
| LD9GL | 409 | 1033 |
| B134L | 486 | 1843 |
| B134S | 486 | 1843 |
| B158L | 486 | 2110 |
APV Gasket Retention, Sealing Geometry and Flow
The replacement gasket must correspond to the original plate and intended fluid distribution arrangement.
Plate Groove Matching
Verify perimeter sealing, gasket profile, port rings and corresponding plate geometry.
Glue-On and Clip-On
Bonded and mechanically retained gaskets require compatible installation designs.
Paraclip and DuoSafety
These variants require separate checks of sealing and retention configuration.
APV Gasket Materials: EPDM, NBR, HNBR and FKM
The supplied product reference lists NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A/B/G compounds. Actual material selection depends on operating conditions.
EPDM / HT EPDM
Considered for selected compatible water-based applications. Verify compound temperature and chemistry limits.
NBRB / NBRP / HNBR
Review fluid compatibility, operating temperature and required material properties.
FKM / Viton Grades
Consider selected applications requiring suitable chemical resistance and temperature performance. Confirm exact grade.
Need Compatible APV Replacement Gaskets?
Send the complete APV equipment model and sealing component details. We can review the information required for compatibility matching.
Other enquiries: Contact Us
Submit Your APV Gasket Details
Please provide your equipment model, complete gasket images, operating conditions and quantity.
Component Storage, Packing and Engineering Support
Our facilities include component storage, packaging preparation and engineering and after-sales support.
Six Checks Before Ordering Replacement APV Gaskets
Confirm the Model
Record the full APV equipment designation and suffix.
Inspect the Plate
Identify the corresponding groove and port geometry.
Check Reference Dimensions
Review HC / VC against verified measurement drawings.
Identify Attachment
Confirm glue-on, clip-on or other special configurations.
Select Material
Verify fluid compatibility, temperatures and cleaning requirements.
Confirm Supply Details
Specify quantity, material, documentation and destination.
Explore More Plate Heat Exchanger Replacement Support
Heat Exchanger Gaskets
Explore other brands, gasket materials and replacement guidance.
All Gaskets →Plate & Gasket Replacement
Learn what information is required for replacement matching.
Replacement Support →Technical Knowledge
Read technical articles about gasket materials and replacement.
Knowledge Center →Frequently Asked Questions
The reference directory covers selected SR, B, Q, J, M, H, N, K, TR, LR, LD and additional APV models. Availability and compatibility are confirmed individually.
HC and VC values are reference measurements expressed in millimetres. They are not sufficient by themselves to establish gasket compatibility. The original plate and measurement datums must also be confirmed.
Not automatically. The original plate, gasket retention and sealing configuration must be reviewed for each design.
The supplied product reference lists NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A/B/G. The specific available compound and suitability must be confirmed for the model and service conditions.
This category concerns compatible aftermarket gasket enquiries. APV names are used for equipment identification and do not imply original manufacture, endorsement or authorization.
Looking for an APV Replacement Gasket?
Send your equipment model, complete gasket photos, operating conditions and required quantity for compatible replacement review.
Request APV Gasket Matching →As one of the most professional apv gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced apv gaskets made in China here from our factory. Customized orders are welcome.
APV Compatible Gaskets, APV NBR Gaskets, APV Replacement Gaskets
