Compatible Aftermarket Replacement Gaskets

Mueller Heat Exchanger Gaskets for AT-Series Plate Heat Exchangers

Explore compatible aftermarket replacement gaskets for existing Mueller gasketed plate heat exchangers. Our historical model references include AT04P, AT10, AT40, AT80M, AT161, AT184FF, AT192FF and other AT-series configurations.

Correct gasket matching requires the complete equipment designation, original plate sealing groove, port-ring geometry, gasket attachment and elastomer material. Review the products below, compare reference dimensions and send your model information for technical matching.

  • Mueller Viton Gaskets
    OEM-compatible Viton (FKM) replacement gaskets manufactured by WTSML for Mueller plate heat exchangers used in demanding food and process applications.
    Designed to deliver consistent sealing performance across repeated production...
    view more
  • Mueller NBR Gaskets
    OEM-compatible NBR replacement gaskets manufactured by WTSML for Mueller plate heat exchangers used in food, edible oil and industrial processing applications.
    Designed to maintain stable sealing performance during frequent...
    view more
  • Mueller EPDM Gaskets
    OEM-compatible EPDM replacement gaskets manufactured by WTSML for Mueller plate heat exchangers operating in hygienic processing facilities.
    Designed to maintain sealing stability after repeated shutdown and restart cycles...
    view more
  • Mueller Compatible Gaskets
    OEM-compatible Mueller replacement gaskets manufactured by WTSML for reliable long-term maintenance and uninterrupted plant operation.
    Designed to provide stable dimensional compatibility and consistent sealing performance across...
    view more
  • Mueller Replacement Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for Mueller plate heat exchangers used in food, beverage and industrial process systems.
    Designed to support maintenance standardization across multiple units and reduce...
    view more
  • Mueller Plate Heat Exchanger Gaskets
    Hygienic-grade OEM-compatible replacement gaskets manufactured by WTSML for Mueller plate heat exchangers used in food, dairy and beverage processing systems.
    Designed to support CIP cleaning compatibility and reduce...
    view more
Mueller Aftermarket Gasket Replacement

Replacement Gaskets for Mueller AT-Series Plate Heat Exchangers

Mueller replacement gasket selection starts with identifying the existing plate heat exchanger model and verifying its original sealing configuration. Model names and reference dimensions alone are not sufficient to establish gasket interchangeability.

Use the AT-series model directory, HC/VC reference data and gasket selection checklist below to prepare a technical enquiry for compatible aftermarket parts.

MODEL MATCHING

AT-Series Identification

Identify the full Mueller model and exact suffix, including AT40 variants.

GASKET GEOMETRY

Profile & Port Sealing

Verify the gasket groove, perimeter seal, port rings and retention arrangement.

MATERIAL SELECTION

Process-Compatible Elastomers

Review operating fluids, temperatures, pressure and cleaning conditions before selecting the compound.

Gasket Product Image References

Plate Heat Exchanger Sealing Component Gallery

The following photographs illustrate general replacement gasket configurations. They are not verified Mueller-specific model photographs and should not be used alone for component matching.

Photo notice: The images are illustrative component references only. For Mueller gasket matching, provide the complete original gasket image and plate details.
Mueller AT Model Directory

Mueller AT-Series Replacement Gasket Model References

The following 15 historical AT model references have both HC and VC values in the available documentation. Actual supply and compatibility are subject to individual review.

SMALL AT SERIES

AT04P & AT10

AT04P AT10

Identify the complete exchanger model and original sealing layout.

AT40 VARIANTS

AT40 Model Family

AT40 AT40FF AT40L AT40M AT40P

These five variants share the same HC/VC values in the source. Their gasket designs must still be identified separately.

AT80 FAMILY

AT80M & AT805

AT80M AT805

Confirm the model marking, port layout, plate groove and gasket retention.

FF / SPECIAL REFERENCES

AT161, AT184FF & AT192FF

AT161 AT184FF AT192FF

Suffixes and sealing design variants must be verified before confirming replacement gaskets.

LARGER AT REFERENCES

AT1306 & AT1309

AT1306 AT1309

Check complete equipment identification, gasket dimensions, material and quantity.

ADDITIONAL AT MODEL

AT20P & Other Enquiries

AT20P

For other Mueller models or uncertain designations, send the nameplate and full gasket photographs.

Request Model Matching →
Compatibility notice: Mueller names identify existing plate heat exchanger equipment for aftermarket replacement enquiries. Listing a model does not establish stock availability, original manufacture, brand authorization or guaranteed interchangeability.
Technical Identification Data

Mueller AT-Series HC / VC Reference Dimensions

The values below were transcribed from WTSML's historical Mueller gasket reference. Only models with complete HC and VC data are displayed.

Mueller Model HC (mm) VC (mm)
AT04P 61 480
AT10 118 691
AT40 257 1227
AT40FF 257 1227
AT40L 257 1227
AT40M 257 1227
AT40P 257 1227
AT80M 382 1526
AT161 310 1240
AT184FF 405 1530
AT192FF 550 1885
AT805 382 966
AT1306 450 1266
AT1309 450 1639
AT20P 212 868
Reference basis: HC and VC are listed in millimetres in the historical Mueller product documentation. These are identification references rather than certified manufacturing dimensions.
Engineering caution: The supplied source does not establish the exact measurement datum points or tolerances. Even when HC/VC values match, the actual gasket profile, retention system, port sealing and plate construction may differ. Original drawings or component samples must be reviewed before final replacement confirmation.
Model Variant Identification

Why Mueller AT40 Gasket Variants Need Individual Verification

AT40, AT40FF, AT40L, AT40M and AT40P all show HC 257 mm and VC 1227 mm in the historical reference. They should not be assumed to use the same gasket without checking the existing plate.

FULL DESIGNATION

Verify Model Suffixes

Record the original exchanger nameplate and complete AT model, including suffixes and plate markings.

GROOVE GEOMETRY

Check the Gasket Path

Compare the complete perimeter outline, sealing cross-section, port rings and groove.

ATTACHMENT

Confirm Retention Method

Identify any bonded or mechanical retention features used by the existing gasket and plate.

Technical takeaway: Matching reference dimensions can help narrow the model, but they cannot verify gasket interchangeability or material suitability.
Elastomer Selection

Mueller Replacement Gasket Materials: EPDM, NBR, HNBR and FKM

Select the gasket compound for the existing process duty, not simply by exchanger brand. Both circuits, cleaning media and operating temperature must be considered.

EPDM

EPDM / High-Temperature EPDM

Often evaluated for compatible water-based heating and cooling services. Verify the specific elastomer grade.

NITRILE

NBR / HNBR

Consider nitrile-based compounds for selected compatible fluids, including some oil duties. Confirm full compatibility.

FLUOROELASTOMER

FKM

May be considered for selected demanding chemical or temperature conditions. Suitability depends on the compound and exact operating fluid.

Material verification: Actual chemical resistance, service temperature and performance depend on the specific formulation. Do not substitute gasket materials based only on general elastomer names.
Maintenance and Replacement

When Should Mueller Plate Heat Exchanger Gaskets Be Replaced?

Replacement decisions should consider the gasket condition and the root cause of leakage rather than the operating age alone.

HARDENING

Loss of Elasticity

Inspect for compression set, cracking and loss of sealing resilience. Review temperature cycles and aging history.

SWELLING

Unexpected Gasket Growth

Swelling or softening can indicate material incompatibility. Confirm process and cleaning chemistry.

LEAKAGE

External or Internal Leakage

Check whether leakage originates from a gasket, damaged plate, incorrect assembly or another equipment condition.

Before regasketing: Inspect the plate surfaces, sealing grooves, plate order, frame alignment and applicable closing dimension. Replace damaged components according to the relevant equipment service procedure.
Mueller Replacement Gasket RFQ

Need Compatible Mueller AT-Series Gaskets?

Send your current exchanger details and original gasket photographs for replacement matching and quotation review.

01 — Equipment Identification Full Mueller AT model, nameplate photograph, serial or plate marking where available
02 — Plate and Gasket Photos Full gasket outline, port seals, plate groove, clips or bonding details
03 — Service Requirements Process fluids, temperature, pressure, concentrations and cleaning chemicals
04 — Order Details Number of plates, required gasket quantity, material grade if known, destination country
Request a Quotation

Submit Your Mueller Replacement Gasket Requirements

Provide the full model, original component photos, material requirements and required quantity.

 
Component Handling and Support

Warehouse, Packing and Engineering Support

Reference photographs from WTSML's operating environment show spare component storage, packing preparation and engineering support.

Mueller Gasket Buyer Checklist

Six Checks Before Ordering Mueller Replacement Gaskets

STEP 01

Record the Model

Confirm the complete Mueller AT model and any suffixes.

STEP 02

Photograph the Plate

Capture both plate faces, gasket groove and port areas.

STEP 03

Compare Dimensions

Review HC and VC with the correct measurement datum and original drawing.

STEP 04

Identify Attachment

Document the glue-on, clip-on or other retention arrangement.

STEP 05

Select Material

Confirm process media, temperature, pressure and cleaning exposure.

STEP 06

Confirm Quantity

Specify the gasket set, spare allowance, documents and destination.

Maintenance safety: Before dismantling the plate pack, isolate, cool, depressurize and drain the exchanger. Follow approved equipment maintenance and reassembly procedures.
Related Products and Resources

More Heat Exchanger Replacement Support

Replacement Gaskets

Explore other brands and gasket references.

All Gaskets →

Heat Exchanger Plates

Review replacement plate selection.

Replacement Plates →

Plate & Gasket Replacement

Understand component identification and replacement planning.

Replacement Support →

Maintenance & Repair

Learn about leakage, gasket condition and plate-pack servicing.

Maintenance Guide →

Quality Control

Review inspection and component handling information.

Quality Control →

Technical Knowledge

Explore material and sealing guides.

Knowledge Center →
Mueller Replacement Gasket FAQ

Frequently Asked Questions

Which Mueller AT gasket models are included in this reference? +

The historical reference includes 15 AT model designations with complete HC and VC values, including AT04P, AT10, AT40 variants, AT80M, AT805, AT1306 and AT1309. Compatibility and supply must be verified.

Are Mueller AT40, AT40FF and AT40P gaskets interchangeable? +

Not automatically. These models share the same reference HC and VC values, but gasket sealing geometry, port arrangement and retention features require separate checks.

What do HC and VC mean in the Mueller table? +

HC and VC are millimetre reference measurements recorded in the historical model documentation. Confirm the original measurement datums and tolerances before final matching.

Which elastomer is suitable for Mueller heat exchanger gaskets? +

Select EPDM, NBR, HNBR, FKM or another verified material by reviewing fluid chemistry, concentration, operating temperature, pressure and cleaning conditions.

Are these original Mueller manufacturer gaskets? +

This page covers compatible aftermarket replacement enquiries. The Mueller name identifies existing equipment and does not imply original manufacture, affiliation, authorization or endorsement.

Mueller AT-Series Replacement Gaskets

Need Mueller AT-Series Replacement Gasket Support?

Send your full model, plate and gasket photographs, process conditions and required quantity for compatible replacement identification.

Request Mueller Gasket Matching →

As one of the most professional mueller gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced mueller gaskets made in China here from our factory. Customized orders are welcome.

Mueller Compatible Gaskets, mueller gaskets, Mueller Replacement Gaskets
Send Inquiry
Send Inquiry