Compatible Aftermarket Gaskets

Tranter Replacement Gaskets by GX, GXD, GXP and GC Models

Explore compatible aftermarket sealing gaskets for existing Tranter gasketed plate heat exchangers. Our technical references cover selected GX, GXD, GXP, GC, GL, GCP and related model families for replacement enquiries.

Matching requires the complete model designation, plate sealing groove, gasket attachment method and suitable elastomer compound. Browse the products below or submit your equipment model, gasket photographs and quantity for technical review.

  • Tranter Viton Gaskets
    OEM-compatible FKM (Viton) replacement gaskets for Tranter plate heat exchangers operating in high-temperature and chemically demanding environments.
    Designed for stable sealing performance under thermal cycling and aggressive...
    view more
  • Tranter NBR Gaskets
    OEM-compatible NBR replacement gaskets for Tranter plate heat exchangers used in oil cooling, hydraulic and industrial process systems.
    Designed for stable sealing behavior during progressive wear conditions and scheduled...
    view more
  • Tranter EPDM Gaskets
    OEM-compatible EPDM replacement gaskets manufactured for Tranter plate heat exchangers used in hot water, HVAC and hygienic process applications.
    Designed to support uniform plate compression, reliable sealing and stable thermal...
    view more
  • Tranter Compatible Gaskets
    OEM-compatible replacement gaskets manufactured for a wide range of Tranter plate heat exchanger models.
    Engineered with dimensional verification and controlled production to reduce fitment risks during replacement....
    view more
  • Tranter Replacement Gaskets
    OEM-compatible replacement gaskets manufactured for Tranter plate heat exchangers used in planned maintenance and equipment overhauls.
    Stable dimensions and controlled elastomer quality help streamline installation during...
    view more
  • Tranter Plate Heat Exchanger Gaskets
    OEM-compatible replacement gaskets engineered for accurate installation on Tranter plate heat exchangers.
    Precision-controlled profiles help achieve consistent seating, even compression and reliable sealing during maintenance....
    view more
Tranter Aftermarket Gasket Solutions

Compatible Replacement Gaskets for Tranter Plate Heat Exchangers

Tranter gasket replacement requires careful matching of the complete equipment model, plate sealing groove, port-ring geometry, gasket retention and elastomer material.

This technical reference page helps buyers identify GX, GXD, GXP and related models, review available HC / VC values and prepare a replacement-gasket enquiry.

MODEL FAMILY

GX, GC and GL References

Identify the complete equipment model and corresponding gasket profile.

DESIGN VARIANT

GXD, GXP and GCP

Similar numeric designations do not automatically mean interchangeable gaskets.

MATERIAL & ASSEMBLY

Sealing and Retention

Confirm compound suitability, gasket attachment and original plate configuration.

Tranter Gasket Product Gallery

Tranter Gaskets and Replacement Parts References

Compare the following product photographs with the original equipment components. Final identification requires the correct model and plate.

Photo identification: Images are supplied for component reference only. Confirm the model, profile, material and supply availability before selecting a replacement.
Tranter Equipment Identification

Tranter Gasket Model Reference Chart

The original model chart supports visual identification. Use the searchable series directory and technical reference table below to review specific models.

Tranter plate heat exchanger gasket model identification chart

Model reference for preliminary identification. Verify the actual replacement gasket separately.

Tranter Model Directory

Tranter GX, GXD, GXP, GC and Related Gasket Models

The following model designations come from the supplied product references. They help buyers identify existing equipment but do not represent confirmed inventory or interchangeability.

GX SERIES

Tranter GX References

GX012 GX018 GX026 GX042 GX051 GX064 GX091 GX100 GX12 GX16 GX18 GX42 GX51 GX64 GX85 GX91 GX126

Verify whether model names with and without leading zeros refer to the same configuration before matching.

GXD SERIES

Tranter GXD References

GXD012 GXD018 GXD026 GXD037 GXD042 GXD051 GXD060 GXD064 GXD085 GXD091 GXD100 GXD140 GXD145 GXD180 GXD205 GXD265

GXD variants must be checked against the plate groove and gasket design.

GXP SERIES

Tranter GXP References

GXP018 GXP026 GXP037 GXP042 GXP051 GXP118 GXP085 GXP100

Do not assume a GXP gasket is interchangeable with GX or GXD based solely on the model number.

GC / GL SERIES

Tranter GC and GL References

GC12 GC26 GC54 GC60 GL13

Confirm the exact equipment model and sealing component profile.

GCP / GFP SERIES

Tranter GCP and GFP References

GCP026 GCP030 GCP051 GCP060 GCP05 GCP51 GFP030 GFP050 GFP057 GFP080 GFP097 GFP100 GFP180 GFP187 GF057 GF097 GF187

Historical naming and suffix differences require confirmation.

GCD / GM SERIES

Additional Gasket Identifiers

GCD006 GCD012 GCD030 GCD054 GCD055 GCD065 GMD010 TD10 GM56 GM59 GM138 GM257 GM276

Use the original equipment identification to verify these historical references.

HX / HXD SERIES

Tranter HX References

HX012 HX12 HX025 HX25 HX050 HX50 HXD012 HXD025 HXD050 HXP050

Model aliases and different prefixes should not be assumed interchangeable.

ADDITIONAL REFERENCES

S, WT and TW Series

S3 S8 WT10 WT18 TW5 TW10 TW18

Manufacturer attribution and gasket applicability need individual verification.

OTHER MODEL ENQUIRIES

Need Help Identifying Your Model?

If the equipment or gasket model is not listed, send the nameplate, component photographs, operating conditions and required quantity.

Request Model Matching →
Model-reference policy: Model names are used for identification and aftermarket replacement enquiries. They do not indicate original manufacture, brand authorization, stock availability or guaranteed interchangeability.
Technical Reference Data

Tranter HC / VC Reference Dimensions by Gasket Model

Compare available HC and VC values for selected Tranter gasket references. Only models with both source values provided are included in the table.

Measurement basis: The reference provides HC and VC in millimetres, but the exact measurement datum points and tolerances still require confirmation. Use these figures for preliminary identification only.
Tranter Model HC (mm) VC (mm)
GX012 135 592
GX018 135 822
GX026 226 779
GX042 226 1189
GX051 300 1143
GX064 285 1320
GX091 285 1800
GX100 420 1490
GXP018 135 822
GXP026 226 779
GXP042 226 1188
GXP051 300 1143
GXD012 135 592
GXD018 135 822
GXD026 226 779
GXD042 226 1189
GXD051 300 1143
GXD060 420 910
GXD064 285 1320
GXD085 570 1140
GXD091 285 1800
GXD100 420 1490
GXD140 420 2070
GXD145 570 1720
GXD180 420 2650
GXD205 570 2300
GXD265 570 2880
GFP050 380 1053
GFP057 380 1053
GFP097 380 1503
GFP180 380 2473
GFP187 380 2473
GCP026 226 779
GCP051 300 1143
GCP060 420 910
Technical Reference Notice: HC and VC figures are for preliminary model identification, not final manufacturing or interchangeability approval. In the supplied data, GXP042 has VC 1188 mm, while GX042 and GXD042 have VC 1189 mm. These source values have been preserved and require confirmation against original drawings.
Gasket Selection Technology

Tranter Gasket Sealing Geometry, Port Rings and Retention

Correct aftermarket replacement depends on the relationship between the gasket, existing heat-transfer plate and compressed plate pack.

PLATE GEOMETRY

Perimeter Seal and Groove

Match the gasket outline, cross-section and plate groove. Similar reference dimensions do not confirm an identical sealing profile.

PORT CONFIGURATION

Fluid Distribution and Port Rings

Gasket ports help direct fluids through intended channels. Confirm the original port-sealing and plate configuration.

ATTACHMENT DESIGN

Glue-On and Clip-On

Identify whether the original gasket is bonded or mechanically retained. The new gasket must match the corresponding plate.

Flow configuration: Historical product information mentions parallel and diagonal flow arrangements. Confirm the port sealing layout of the existing plate pack before ordering a gasket.
Elastomer Material Selection

Tranter Gasket Materials: EPDM, NBR, HNBR and FKM

The supplied product reference includes NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A, B and G designations. Exact compound suitability depends on the operating duty.

EPDM FAMILY

EPDM / HT EPDM

Considered for selected compatible water-based heating and cooling duties. Confirm chemical and temperature limitations for the precise compound.

NITRILE FAMILY

NBRB / NBRP / HNBR

Nitrile-based grades require checks against process fluids, operating temperature and cleaning chemicals. Do not assume the grades are equivalent.

FLUOROELASTOMER

FKM / Viton Grades

Selected applications may require fluoroelastomer materials. Verify the exact formulation, temperature and chemical compatibility.

Manufacturing and commercial data: The historical source mentions post-curing at 160°C for four hours, ISO9001-2000 and a one-year warranty. These have not been established as current, universal specifications for every gasket. Confirm valid certification, process requirements and quotation terms.
Tranter Replacement Gasket RFQ

Need Compatible Tranter Replacement Gaskets?

Share the existing equipment model, gasket photographs and process requirements. We can review the information necessary for suitable replacement matching.

01 — Full Model Identification Equipment model, complete GX / GXD / GXP / GC designation and nameplate
02 — Gasket and Plate Photographs Complete gasket outline, plate groove, port rings and attachment features
03 — Operating Conditions Process medium, concentration, operating temperature, pressure and cleaning chemicals
04 — Purchasing Requirements Gasket quantity, material if known, destination and supporting documentation

General enquiries: Contact Us .

Request a Quotation

Submit Your Tranter Gasket Requirements

Please include the complete model designation, gasket and plate photographs, service conditions and required quantity.

 
Component Supply and Technical Support

Warehouse, Packing and Engineering Support

Our facilities include component storage, packing and shipment preparation, as well as engineering and after-sales office support.

Replacement Gasket Purchasing Guide

Six Checks Before Ordering Tranter Replacement Gaskets

A structured identification process helps reduce incorrect replacement purchases and unnecessary maintenance delays.

STEP 01

Record the Complete Model

Confirm the equipment nameplate, model prefix, numeric code and suffix.

STEP 02

Identify the Original Plate

Check the plate type, gasket groove and port arrangement.

STEP 03

Review Reference Dimensions

Compare HC / VC figures only when measurement datums are verified.

STEP 04

Confirm Gasket Retention

Identify glue-on, clip-on or other original attachment configurations.

STEP 05

Check Elastomer Material

Review fluid compatibility, pressure, temperature and cleaning chemicals.

STEP 06

Confirm the Order

Specify gasket quantity, material grade, documentation and shipping destination.

Maintenance safety: Before opening a gasketed heat exchanger, isolate, cool, depressurize and drain the unit according to the applicable maintenance procedures. Confirm the correct plate-pack assembly and tightening requirements.
Related Products and Resources

Additional Plate Heat Exchanger Replacement Support

Heat Exchanger Gaskets

Explore gasket brands, model references and materials.

All Gaskets →

Heat Exchanger Plates

Review replacement plate identification and technical matching.

Replacement Plates →

Plate & Gasket Replacement

Understand replacement component selection and enquiry details.

Replacement Support →

Maintenance & Repair

Learn about sealing failures, leakage and plate-pack maintenance.

Maintenance Guide →

Quality Control

Explore component handling and production quality considerations.

Quality Control →

Technical Knowledge

Read technical guides about gasket materials, sealing and replacement.

Knowledge Center →
Tranter Gasket FAQ

Frequently Asked Questions

Which Tranter gasket model families are listed? +

The reference directory includes selected GX, GXD, GXP, GC, GL, GCP, GFP and related historical models. Individual compatibility and availability checks are required.

Are GX, GXD and GXP Tranter gaskets interchangeable? +

Not automatically. The complete model designation, plate sealing groove, gasket geometry and retention configuration must be checked.

What are HC and VC values used for? +

The source provides HC and VC values in millimetres for model reference. Exact measurement datums and tolerances must be verified before final gasket matching.

Which material should I choose for Tranter gaskets? +

Material selection depends on fluid chemistry, concentration, operating temperature, pressure and cleaning conditions. Confirm the compound for the intended service.

Are these original Tranter manufacturer gaskets? +

This page covers compatible aftermarket replacement enquiries. Tranter names identify existing equipment and do not imply original manufacture, endorsement or authorization.

Tranter Compatible Replacement Gaskets

Looking for GX, GXD or GXP Replacement Gaskets?

Send the full Tranter model, gasket and plate photographs, operating conditions and required quantity for a compatible replacement review.

Request Tranter Gasket Matching →

As one of the most professional tranter gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced tranter gaskets made in China here from our factory. Customized orders are welcome.

Tranter Compatible Gaskets, tranter gaskets, Tranter Replacement Gaskets
Send Inquiry
Send Inquiry