WTSML | NON-OEM ACCESSEN SPARE PARTS

Accessen Plate Heat Exchanger Replacement Gaskets

Find independent aftermarket gasket options for selected Accessen AN, AU and AC gasketed plate heat exchangers. Our reference list includes 11 models, from AC98 and AN10L2 to AU25L3.

Replacement selection requires more than a matching model name. The original plate groove, port seals, clip positions, compound and operating conditions must be verified before ordering.

Accessen's gasketed exchanger ranges include glue-free clip-on designs. The applicable retention system must be confirmed for the installed unit.

Request Accessen Gasket Quote →
General replacement plate heat exchanger gasket product reference
Independent replacement components. Accessen model names are used solely to identify existing equipment. The product image illustrates a general gasket category, not a certified Accessen-specific fit.
  • Accessen Viton Gaskets
    OEM-compatible FKM (Viton®) replacement gaskets manufactured by WTSML for Accessen plate heat exchangers used in demanding thermal systems.
    Designed for applications operating under extended peak thermal loads where stable...
    view more
  • Accessen NBR Gaskets
    OEM-compatible NBR replacement gaskets manufactured by WTSML for Accessen plate heat exchangers used in heating, cooling and industrial circulation systems.
    Designed for applications that experience frequent pump cycling,...
    view more
  • Accessen EPDM Gaskets
    OEM-compatible EPDM replacement gaskets manufactured by WTSML for Accessen plate heat exchangers operating in closed-loop heating and cooling systems.
    Designed for applications where circulating water quality, glycol mixtures and...
    view more
  • Accessen Compatible Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for Accessen plate heat exchangers used alongside other leading brands in commercial and industrial energy systems.
    Designed to support consistent maintenance across...
    view more
  • Accessen Replacement Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for Accessen plate heat exchangers used in district heating, commercial HVAC and hot water systems.
    Designed to support seasonal commissioning, annual maintenance and...
    view more
  • Accessen Plate Heat Exchanger Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for Accessen plate heat exchangers used in hydronic heating, cooling and industrial circulation systems.
    Designed to support accurate flow distribution and dependable...
    view more
General plate heat exchanger replacement gasket reference image
Accessen Aftermarket Spare Parts

Replacement Seals for Accessen Gasketed Plate Packs

A gasket must follow the plate's channel perimeter and port sealing arrangement. For an existing Accessen exchanger, the correct replacement is determined by the original plate design, not by the brand name alone.

The Accessen replacement reference list includes selected AC, AN and AU models. These designations provide a starting point for component identification, while final suitability depends on the gasket sample and equipment configuration.

  • Independent non-OEM gasket replacement
  • Selected AC, AN and AU model references
  • Gasketed plate-and-frame equipment
  • Port and channel seal identification
  • Model-specific retention and compound review
Plate Geometry and Sealing Route

Why the Original Accessen Plate Profile Matters

Accessen designs plate patterns for different thermal and hydraulic duties. Plates with similar port spacing may differ in their corrugation geometry, channel depth or sealing groove.

An aftermarket gasket must match the full sealing contour, port connections and retention features. Checking horizontal and vertical port centers alone is not enough to establish fit.

  • Identify the complete plate model and variant.
  • Inspect gasket grooves around every port.
  • Check the entire sealing perimeter.
  • Record any special end-position seals.
  • Compare the original gasket to the proposed part.
Plate heat exchanger plate pack arrangement for sealing and component identification
Engineering reference: The plate arrangement and sealing geometry shown here are general technical illustrations. They do not certify compatibility with an individual Accessen model.
Accessen Model Reference Index

Accessen AC, AN and AU Replacement Gasket Models

The following 11 model names are included in the supplied Accessen replacement reference list. This is a model-identification index for technical enquiries, not a guarantee of current stock or immediate availability.

HC and VC dimensions have not been supplied for these models. They are deliberately left unassigned rather than estimated from another plate heat exchanger brand.

AC Series

Accessen Model HC (mm) VC (mm) Identification
AC98 — — Original plate / gasket required

AN Series

Accessen Model HC (mm) VC (mm) Identification
AN10L2 — — Confirm complete suffix
AN15L2 — — Confirm complete suffix
AN20 — — Confirm plate configuration
AN30L2 — — Confirm complete suffix
AN35L2 — — Confirm complete suffix
AN40L2 — — Confirm complete suffix
AN45L1 — — Confirm complete suffix

AU Series

Accessen Model HC (mm) VC (mm) Identification
AU10L1 — — Confirm plate and gasket
AU15L1 — — Confirm plate and gasket
AU25L3 — — Confirm plate and gasket
Model-list limitation: Accessen also identifies AS and AP as gasketed plate heat exchanger product series, but no independently confirmed gasket model or dimension list for those series has been provided here. Contact WTSML with the original nameplate and plate photographs for an unlisted model.
General clip-on gasket attachment structure
Glue-Free Gasket Technology

Clip-On Retention and Plate Alignment

Accessen describes glue-free clip-on gaskets for its modern gasketed plate exchanger ranges. Their mechanical fixing features are intended to locate the seal on the corresponding plate.

For replacement procurement, confirm the exact clip location, gasket cross-section and plate groove. Different mechanical retention designs cannot be assumed to be interchangeable.

  • Photograph the original gasket fixing tabs.
  • Check attachment positions around the plate.
  • Inspect the sealing groove for deformation.
  • Confirm port-ring connections and corners.
  • Follow approved assembly procedures.
Installation note: The picture demonstrates a general clip-on retention concept, not an Accessen OEM assembly drawing. For older or modified equipment, verify the actual fixing method instead of assuming all gaskets are glue-free.
Elastomer Material Review

Selecting NBR, EPDM, HNBR or FKM Replacement Seals

A suitable gasket compound must tolerate the actual service fluid and operating conditions. NBR, EPDM, HNBR and fluoroelastomer families offer different properties, but no one material is suitable for every heat exchanger.

Compound requirements should be specified using fluid chemistry, normal and maximum temperatures, pressure conditions, cleaning agents and any applicable regulatory needs.

  • NBR: evaluate for appropriate oil-related or compatible fluids
  • EPDM: assess for compatible water and glycol applications
  • HNBR: consider where its verified compound properties are required
  • FKM: evaluate for compatible specialized chemical duties
  • Other grades: subject to model and supplier confirmation
Plate heat exchanger replacement gasket product reference
Material availability: The material families above are technical selection references, not a confirmed stock list for all Accessen models. Actual formulation, material documents and service limits must be verified before an order is approved.
Industrial gasket product photo for replacement-part identification
Original Component Identification

How to Identify an Accessen Replacement Gasket

A nameplate helps locate the relevant Accessen equipment family, but it may not define every gasket detail. Plate changes, different channel arrangements or previous servicing may affect the replacement requirement.

Use photographs and measurements of the actual removed gasket to confirm the seal path, fastening positions and profile details. An original sample or approved drawing may be needed before manufacture.

  • Full equipment model and plate number
  • Nameplate and complete exchanger photographs
  • Original gasket front and back views
  • Port rings, corner and clip details
  • Measured plate and port-center dimensions
  • Required elastomer and quantity
WTSML | ACCESSEN GASKET RFQ

Request Accessen AN, AU or AC Replacement Gaskets

Send your complete Accessen model, equipment nameplate, original plate and gasket photographs, operating fluids, temperature conditions, required compound, quantity and shipping destination. Detailed identification information helps reduce incorrect replacement selections.

Submit Accessen Gasket Enquiry →
Heating and Cooling Applications

Replacement Gaskets for HVAC and Industrial Systems

Accessen gasketed plate exchangers are used in heating, cooling and industrial heat-transfer systems. The required gasket performance varies with the fluid circuits and equipment duty.

For district heating or secondary cooling water, record the water treatment chemistry and temperature range. For industrial applications, check process liquids, additives and cleaning exposure.

  • Building heating and cooling circuits
  • District heating and heat substations
  • Data-center cooling support systems
  • Industrial water and process cooling
  • Other compatible liquid-to-liquid duties
Heat exchanger gasket positioned in a plate sealing channel
Replacement plate heat exchanger spare-part product photograph
Maintenance and Spare Part Planning

Prepare Gasket Sets for Scheduled Maintenance

Replacement gasket identification should be completed before opening an exchanger for major maintenance. A missing gasket set or incorrect compound can postpone plate-pack reassembly.

For sites with multiple Accessen models, prepare a separate equipment record for each exchanger and confirm its plate count, gasket configuration and maintenance timetable.

  • Record exact installed models and variants.
  • Check plate count and gasket quantity.
  • Identify special port or end-position seals.
  • Confirm materials and installation method.
  • Agree lead time and shipment conditions.
Technical Purchasing Checklist

Three Checks Before Approving Accessen Gaskets

01. Equipment Identity

Verify the full model designation, plate geometry, nameplate and original gasket configuration.

02. Sealing Specification

Confirm gasket groove, retention features, material formulation, port-ring geometry and working fluids.

03. Procurement Details

Agree the required quantity, inspection documents, delivery conditions and order-specific terms.

Scope of claims: Model references and illustrative photographs do not establish OEM status, verified compatibility, current material certification, production capacity or a standard warranty. Such details must be supported by the actual supply documentation.
Accessen Gasket Technical FAQ

Frequently Asked Questions

1. Are these original Accessen OEM gaskets?

No. This category covers independent aftermarket replacement gasket enquiries. Accessen brand and model names are used solely for equipment identification.

2. Which Accessen models are listed here?

The reference list includes AC98; AN10L2, AN15L2, AN20, AN30L2, AN35L2, AN40L2 and AN45L1; and AU10L1, AU15L1 and AU25L3. These are model references, not confirmed stock.

3. Do all Accessen gaskets use clip-on fixing?

Accessen describes glue-free clip-on systems for its modern gasketed exchanger ranges. The fixing method for an installed model or older plate must still be verified.

4. Can I identify the correct gasket from the model name alone?

Not always. The complete model, original plate, gasket contour, port configuration and retention details may be needed to confirm a replacement.

5. What should I include in an Accessen gasket RFQ?

Provide the full equipment model, nameplate, plate and gasket images, service fluids, temperatures, required material, quantity and delivery destination.

Related WTSML Product Categories

Replacement Gaskets, Plates and Complete Heat Exchangers

Gasket renewal should also include inspection of the original metal plates and sealing grooves. If plate deformation, cracking or damaged port surfaces are present, gasket replacement alone may be insufficient.

As one of the most professional accessen gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced accessen gaskets made in China here from our factory. Customized orders are welcome.

Accessen EPDM Gaskets, accessen gaskets, Accessen NBR Gaskets
Send Inquiry
Send Inquiry