Compatible ITT Standard Replacement Gaskets

ITT Heat Exchanger Gaskets by P and PF Model Series

Explore compatible aftermarket replacement gaskets for existing ITT Standard gasketed plate heat exchangers. Our documented references include selected P and PF series models, with HC and VC dimensions for preliminary identification.

Accurate replacement requires the complete model designation, corresponding plate sealing groove, gasket attachment method and suitable elastomer compound. Browse the products below or submit your model, original gasket photographs and operating requirements for technical review.

  • ITT Viton Gaskets
    OEM-compatible Viton (FKM) replacement gaskets manufactured by WTSML for ITT plate heat exchangers operating in chemically aggressive and variable process environments.
    Designed for applications where chemical exposure occurs in...
    view more
  • ITT NBR Gaskets
    OEM-compatible NBR replacement gaskets manufactured by WTSML for ITT plate heat exchangers operating in oil-based and hydraulic systems.
    Designed for stable sealing performance under variable temperature and pressure...
    view more
  • ITT EPDM Gaskets
    OEM-compatible EPDM replacement gaskets manufactured by WTSML for ITT plate heat exchangers used in water-based and HVAC systems.
    Designed to support reliable sealing performance when installed under correct compression and...
    view more
  • ITT Compatible Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for ITT plate heat exchangers, designed to support industrial procurement qualification processes.
    Suitable for companies evaluating second-source suppliers for maintenance...
    view more
  • ITT Replacement Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for ITT plate heat exchangers requiring urgent maintenance or downtime recovery.
    Designed to support fast restoration of sealing performance in industrial cooling and...
    view more
  • ITT Plate Heat Exchanger Gaskets
    OEM-compatible replacement gaskets manufactured by WTSML for legacy ITT plate heat exchanger systems, including discontinued and mixed-model installations.
    Designed to support refurbishment and long-term maintenance of older heat...
    view more
ITT Standard Aftermarket Gasket Solutions

Compatible Replacement Gaskets for ITT Standard Plate Heat Exchangers

ITT Standard gasketed plate heat exchangers require sealing components matched to their original plate configurations. Correct replacement involves model identification, gasket geometry, retention features and operating conditions.

This category provides technical references for selected ITT Standard P and PF models, including HC and VC dimensions, material guidance and information needed for replacement enquiries.

P SERIES

ITT Standard P Gaskets

Model references include P4a, P8, P8a, P15, P20, P20a and additional P-series designations.

PF SERIES

ITT Standard PF Gaskets

Review PF15 through PF75 references with available HC and VC dimensions for preliminary matching.

COMPATIBILITY

Sealing & Material Selection

Check the full model, plate groove, gasket retention method and elastomer compound.

ITT Replacement Gasket Gallery

ITT Gasket and Sealing Component Image References

Compare these replacement component references with the original gasket and plate sealing geometry. An image alone cannot confirm interchangeability.

Photo reference: The images illustrate gasket and heat exchanger component references from the supplied sources. The precise ITT model and elastomer grade represented by each image have not been verified.
ITT Standard Gasket Model Directory

ITT Standard P and PF Replacement Gasket Models

Our historical reference provides complete HC and VC data for 29 P-series and PF-series model designations. The models below are grouped by series for easier identification.

P SERIES

ITT P4a to P20a

P4a P8 P8a P15 P20 P20a

Confirm suffix differences such as P8 versus P8a and P20 versus P20a.

P SERIES

ITT P30 to P120

P30 P38 P39 P50 P65 P100 P120

Use complete equipment information and the original gasket outline for matching.

PF SERIES

ITT PF15 to PF35

PF15 PF20 PF25 PF30 PF35

PF-series gaskets require plate-specific profile and port-seal verification.

PF SERIES

ITT PF40 to PF50

PF40 PF41 PF42 PF45 PF50

Similar reference dimensions do not mean the same sealing geometry.

PF SERIES

ITT PF60 to PF75

PF60 PF61 PF65 PF66 PF71 PF75

Check the model, mounting design, original gasket and material grade.

OTHER ENQUIRIES

Need Another ITT Model?

If your existing equipment is not listed, send the nameplate, full gasket image and required quantity for separate review.

Request Model Identification →
Aftermarket compatibility notice: ITT Standard names are identification references for existing equipment. Listed models do not guarantee inventory, original manufacture, brand authorization or interchangeable gasket design.
ITT Standard Technical Reference

ITT Standard P and PF HC / VC Dimensions

Review source-provided HC and VC values in millimetres for selected ITT Standard gasket references. Only models with both values available are included.

Measurement caution: HC and VC are retained exactly as labelled in the historical product data. Their measurement datums and tolerances must be confirmed against the original technical drawing before manufacturing or final matching.
ITT Standard Model HC (mm) VC (mm)
P4a 70 381
P8 70 656
P8a 70 656
P15 126 694
P20 126 894
P20a 126 894
P30 202 950
P38 238 1070
P39 202 1150
P50 202 1450
P65 395 1091
P100 395 1436
P120 480 1490
PF15 135 591
PF20 140 640
PF25 225 719
PF30 234 703
PF35 225 719
PF40 290 1046
PF41 298 1294
PF42 298 1294
PF45 350 1315
PF50 365 930
PF60 365 1450
PF61 353 1478
PF65 430 1550
PF66 439 1939
PF71 596 1842
PF75 765 1850
Technical identification notice: ITT P8 and P8a share the same reference dimensions, as do P20 and P20a. PF25 and PF35, and PF41 and PF42, also share HC/VC values in the supplied data. Identical dimensions do not prove that the gaskets are interchangeable.
ITT Gasket Compatibility

Why P and PF Gasket Model Differences Matter

ITT Standard replacement selection should consider more than the two reference dimensions. Small variations in sealing geometry and retention can affect component fit.

MODEL SUFFIX

P8 Versus P8a

Both models have HC 70 mm and VC 656 mm in the source. Their gasket designs must still be compared individually.

MODEL SUFFIX

P20 Versus P20a

Both are recorded as HC 126 mm and VC 894 mm. Confirm the original gasket outline and plate groove.

PF SERIES

PF25 Versus PF35

Both references show HC 225 mm and VC 719 mm. Model identity remains important despite matching reference values.

Additional example: PF41 and PF42 both have HC 298 mm and VC 1294 mm in the source. The plate groove, fluid-port sealing layout, gasket profile and attachment details still require verification.
Sealing and Gasket Construction

ITT Gasket Profiles, Glue-On and Clip-On Retention

A correctly selected replacement must fit the plate groove, form the intended sealing path and remain correctly positioned during plate-pack assembly.

GEOMETRY

Perimeter Gasket Profile

Match the gasket cross-section and perimeter dimensions to the original plate sealing groove.

PORT SEALING

Port Rings and Flow Routing

Confirm the gasket around each fluid port and its relationship to the plate arrangement.

RETENTION

Glue-On or Clip-On

Identify whether the original component uses adhesive bonding or mechanical attachment. These methods should not be assumed equivalent.

Flow configuration: The supplied historical product description mentions parallel and diagonal flow. The gasket must follow the actual port-sealing configuration of the existing plate pack.
ITT Gasket Material Selection

EPDM, NBR, HNBR and FKM Replacement Gaskets

The historical ITT gasket reference includes NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A, B and G material designations.

EPDM FAMILY

EPDM / HT EPDM

Considered for selected compatible water-based applications. Evaluate actual fluid chemistry, temperature and cleaning conditions.

NITRILE FAMILY

NBRB / NBRP / HNBR

Nitrile elastomers may be appropriate for selected service media. Different formulations have different operating characteristics.

FLUOROELASTOMER

FKM / Viton Grades

Suitable applications depend on the specific compound grade, chemical exposure and temperature.

Material and manufacturing verification: The historical listing also mentions post-curing at 160°C for four hours, ISO9001-2000 and a one-year warranty. These claims have not been confirmed as current specifications for every gasket or compound. Confirm applicable processes, documents and terms before quotation.
ITT Standard Gasket Replacement RFQ

Need Compatible ITT Replacement Gaskets?

Send your complete exchanger model, original plate and gasket photographs and operating conditions for technical identification and quotation review.

01 — Equipment Model ITT Standard P or PF designation, full suffix and nameplate photograph
02 — Plate and Gasket Photos Complete gasket outline, port rings, sealing groove and attachment features
03 — Operating Conditions Process media, concentration, operating temperature, pressure and cleaning chemicals
04 — Purchasing Details Required gasket quantity, material if known, destination and document requirements

General enquiries: Contact Us .

Request a Quotation

Submit Your ITT Standard Gasket Requirements

Please include your full model designation, gasket photos, operating conditions, material requirements and quantity.

 
Component Supply and Support

Warehouse, Packing and Engineering Support

Our facility photographs show component storage, packing preparation and engineering and after-sales office environments.

ITT Gasket Purchasing Guide

Six Checks Before Ordering ITT Standard Replacement Gaskets

Use a structured component-identification process to reduce the risk of ordering a gasket that does not fit the existing plate.

STEP 01

Identify the Full Model

Record the exact ITT Standard P or PF designation and suffix.

STEP 02

Inspect the Existing Plate

Review the plate groove, gasket path and fluid port locations.

STEP 03

Check Reference Dimensions

Compare HC and VC values only with confirmed measurement datums.

STEP 04

Verify Retention Design

Identify glue-on, clip-on or another original fixing method.

STEP 05

Confirm the Elastomer

Check fluids, pressure, operating temperature and cleaning chemicals.

STEP 06

Confirm Supply Details

Specify required quantity, compound grade, supporting documents and delivery destination.

Maintenance safety: Before opening the plate pack, isolate, cool, depressurize and drain the heat exchanger. Follow the equipment's applicable service, installation and tightening procedures.
Related Products and Services

More Plate Heat Exchanger Replacement Support

Heat Exchanger Gaskets

Explore gasket model references, brands and materials.

All Replacement Gaskets →

Heat Exchanger Plates

Review replacement plate identification and product requirements.

Replacement Plates →

Plate & Gasket Replacement

Learn which equipment details are required for accurate matching.

Replacement Support →

Maintenance & Repair

Read about sealing problems, leakage and plate-pack service.

Maintenance Guide →

Quality Control

Explore component inspection and quality considerations.

Quality Control →

Technical Knowledge Center

Explore gasket materials, selection and sealing principles.

Technical Articles →
ITT Standard Gasket FAQ

Frequently Asked Questions

Which ITT Standard replacement gasket models are listed? +

This reference includes 29 ITT Standard P and PF gasket model designations with source-provided HC and VC values. Confirm individual compatibility and availability before ordering.

Are ITT P8 and P8a replacement gaskets interchangeable? +

Not automatically. Both models share HC 70 mm and VC 656 mm in the supplied reference, but the sealing groove, port rings and retention features still need separate verification.

What do HC and VC mean in the model table? +

HC and VC are dimensions labelled in millimetres in the historical technical reference. The precise measurement datum points and tolerances must be verified before using these figures for final gasket matching.

How do I select the correct ITT gasket material? +

Evaluate the process medium, concentration, operating temperature, pressure and cleaning chemicals. Confirm the specific EPDM, NBR, HNBR or FKM compound for the intended duty.

Are these original ITT manufacturer gaskets? +

This page covers compatible aftermarket replacement enquiries. ITT Standard model names identify existing equipment and do not imply original manufacture, endorsement or authorization.

ITT Standard Compatible Replacement Gaskets

Looking for ITT P or PF Series Replacement Gaskets?

Send the full ITT Standard model, original gasket and plate photographs, operating conditions and required quantity for compatible replacement review.

Request ITT Gasket Matching →

As one of the most professional itt gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced itt gaskets made in China here from our factory. Customized orders are welcome.

ITT Compatible Gaskets, ITT Replacement Gaskets, ITT Viton Gaskets
Send Inquiry
Send Inquiry