Cetetherm Plate Heat Exchanger Gaskets
Find replacement gasket options for selected Cetetherm CT and EP plate heat exchanger models. WTSML uses existing equipment information, gasket geometry and process conditions to review aftermarket sealing requirements.
Historical references include nitrile, hydrogenated nitrile, EPDM and fluoroelastomer compounds, with glued and mechanical retention options. The complete model and original gasket profile must be checked before supply.
Request Cetetherm Gasket Quote →
-
Cetetherm Viton GasketsOEM-compatible FKM (Viton®) replacement gaskets manufactured by WTSML for Cetetherm plate heat exchangers used in hygienic hot water and sensitive fluid systems.view more
Designed to support long-term sealing stability in environments... -
Cetetherm NBR GasketsOEM-compatible NBR replacement gaskets manufactured by WTSML for Cetetherm plate heat exchangers operating in cold climate district heating systems.view more
Designed to support stable sealing and flow separation during low-temperature... -
Cetetherm EPDM GasketsOEM-compatible EPDM replacement gaskets manufactured by WTSML for Cetetherm plate heat exchangers in district heating and low-temperature energy systems.view more
Designed to support stable hydraulic separation and optimized heat transfer... -
Cetetherm Compatible GasketsOEM-compatible replacement gaskets manufactured by WTSML for Cetetherm plate heat exchangers used in multi-site district heating and energy distribution networks.view more
Designed to support standardized maintenance strategies across... -
Cetetherm Replacement GasketsOEM-compatible replacement gaskets manufactured by WTSML for Cetetherm plate heat exchangers, supporting both maintenance and system performance optimization projects.view more
Designed to assist retrofit applications where existing... -
Cetetherm Plate Heat Exchanger GasketsOEM-compatible replacement gaskets manufactured by WTSML for Cetetherm heat exchangers used in district heating and energy distribution systems.view more
Designed to maintain stable thermal transfer efficiency under variable load...

Replacement Seals for Existing CT and EP Plate Packs
Cetetherm equipment may remain in service long after its original project documentation has been misplaced. A gasket renewal therefore begins with identifying the installed plate pack rather than choosing a seal from appearance alone.
WTSML's historical catalog records non-OEM gasket options for selected CT and EP equipment. The original sealing contour, port rings and attachment features must be checked before a replacement is accepted.
- Application: plate heat exchanger sealing
- Component type: independent aftermarket gasket
- Equipment references: CT and EP model groups
- Retention: glued or compatible mechanical fitting
- Flow arrangement: parallel or diagonal, where applicable
Gasket Selection for Heating and Hot Water Circuits
Cetetherm equipment is associated with heating and domestic hot water systems. In such installations, the sealing material must be reviewed against the actual heat-transfer fluids and any treatment additives.
Temperature cycling, glycol concentration, water treatment chemistry and cleaning procedures may affect the gasket material decision. The specific service must be known before the elastomer grade is selected.
- District heating and building heat substations
- Secondary heating-water separation
- Domestic hot water generation equipment
- Water-glycol utility systems where applicable
- Existing plate-pack maintenance and seal renewal


Match the Rubber Compound to the Service
The WTSML historical product record includes NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A, B and G references. The selection should be based on a confirmed compound specification rather than a general rubber-family label.
For a heating application, provide the normal and maximum temperatures, operating medium, chemical concentration and cleaning conditions. These details determine which material options warrant further assessment.
- NBRB / NBRP: historical nitrile-grade references
- HNBR: hydrogenated nitrile family
- EPDM: candidate for compatible aqueous media
- HT EPDM: grade requiring documented limits
- Viton A / B / G: fluoroelastomer grade references
Cetetherm CT and EP Gasket Model Reference
The following information has been reorganized from WTSML's historical product records. HC refers to the horizontal port center distance and VC to the vertical port center distance. Values are in millimeters. These are identification references, not approved replacement manufacturing drawings.
CT Series — Historical HC / VC Dimensions
| Cetetherm Model | HC (mm) | VC (mm) |
|---|---|---|
| CT90 | 60 | 357 |
| CT95 | 60 | 357 |
| CT100 | 135 | 590 |
| CT110 | 140 | 640 |
| CT120 | 234 | 703 |
| CT130 | 130 | 625 |
| CT140 | 350 | 1315 |
| CT150 | 365 | 930 |
| CT160 | 225 | 719 |
| CT160W | 225 | 719 |
| CT170 | 225 | 719 |
| CT180 | 365 | 930 |
| CT210 | 140 | 640 |
| CT220 | 298 | 1294 |
| CT230 | 298 | 1294 |
| CT240 | 298 | 1294 |
EP Series — Historical HC / VC Dimensions
| Cetetherm Model | HC (mm) | VC (mm) |
|---|---|---|
| EP90 | 60 | 357 |
| EP100 | 135 | 591 |
| EP110 | 140 | 640 |
| EP120 | — | — |
| EP130 | — | — |
| EP140 | 350 | 1315 |
| EP150 | 365 | 930 |
| EP160 | 223 | 719 |
| EP170 | 223 | 719 |
| EP180 | 365 | 930 |
| EP240 | 298 | 1294 |
Clip Retention, Gluing and the Correct Sealing Path
The way a gasket is held in place matters during plate-pack assembly. Certain Cetetherm model references use mechanical clips; other designs may require adhesive or a different fastening configuration.
The rubber compound does not determine the fixing method. A gasket with the right material but incorrect tabs or groove geometry may not be usable on the original plate.
- Check for clips or tabs around the plate edge.
- Inspect for previous adhesive and groove condition.
- Record the port-ring shape and sealing route.
- Compare full equipment model and any suffix.
- Use the approved assembly procedure.

Request a Cetetherm Gasket Replacement Quote
Send the complete CT or EP model, a photograph of the equipment nameplate, the existing gasket and plate, process media, required compound and replacement quantity. The information will support a model-specific technical enquiry.
Submit Cetetherm Gasket RFQ →
What to Inspect When Renewing a Cetetherm Gasket Set
A planned service shutdown provides an opportunity to inspect more than the elastomer. Check the condition of the original plate grooves, frame components and any visible evidence of leakage or deformation.
The replacement scope should identify normal sealing gaskets and any special port or end-plate arrangements rather than assuming one gasket profile covers all positions.
- Document the plate-pack sequence.
- Inspect the groove and plate edge condition.
- Identify special sealing configurations.
- Confirm gasket quantity and compound grade.
- Follow the approved closing-dimension procedure.
Prepare Replacement Stock Before Maintenance Windows
Heating installations may have fixed maintenance windows when seasonal service demand is lower. Early identification of the gasket type and quantity can help plan procurement. Stock availability and delivery arrangements must be confirmed for each actual order.
Equipment List
Record every installed Cetetherm model separately, including nameplate details and plate-pack information.
Seal Specification
Identify the required compound, retention geometry and any special gasket arrangements.
Procurement Schedule
State the planned shutdown date, required quantity, delivery location and any document requirements.
Frequently Asked Questions
1. Are these original Cetetherm OEM gaskets?
No. The category covers independent aftermarket gasket enquiries. The Cetetherm name identifies the existing equipment.
2. Can CT and EP gaskets be selected using dimensions alone?
No. Port spacing is one reference. Plate geometry, sealing route, fastening method and complete model identification must also be checked.
3. Is EPDM automatically suitable for domestic hot water?
No. Actual compound suitability and any required drinking-water or sanitary approvals must be verified for the installation and relevant market.
4. Are clip-on and glued Cetetherm gaskets interchangeable?
Not automatically. Replacement must follow the original plate fastening design or a separately approved alternative.
5. What should be included in a Cetetherm gasket RFQ?
Send the complete model, nameplate and gasket photos, service media, temperature conditions, required material, quantity and destination.
Replacement Gaskets, Plates and Heat Exchangers
A leaking plate pack may require examination of both the elastomer and the underlying metal components. Where the plate groove or pressure boundary is damaged, gasket renewal alone may not resolve the maintenance issue.
As one of the most professional cetetherm gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced cetetherm gaskets made in China here from our factory. Customized orders are welcome.
Cetetherm Compatible Gaskets, Cetetherm EPDM Gaskets, Cetetherm Plate Heat Exchanger Gaskets
