Alfa Laval Replacement Gaskets: M, A, T, P & Other Models
Explore compatible gasket replacement enquiries for Alfa Laval gasketed plate heat exchangers, including M, A, T, P and other model families. Our model reference directory helps buyers identify existing equipment and provide the correct component details.
Gasket materials and installation types depend on the specific plate, sealing profile and operating duty. Browse available products below or submit your exchanger model, gasket photographs and required quantity.
-
![Alfa Laval Viton Gaskets]()
Alfa Laval Viton GasketsOEM-compatible FKM gaskets for confirmed Alfa Laval plate heat exchanger modelsview more
Designed for selected chemical, hydrocarbon and elevated-temperature process duties
Profile matching covers sealing ribs, port rings and... -
![Alfa Laval Plate Heat Exchanger Gaskets]()
Alfa Laval Plate Heat Exchanger GasketsOEM-compatible gaskets for confirmed Alfa Laval plate heat exchanger modelsview more
NBR, EPDM and FKM materials reviewed for different process conditions
Profile matching covers sealing ribs, port rings and attachment... -
![Alfa Laval Replacement Gaskets]()
Alfa Laval Replacement GasketsOEM-compatible replacement gaskets for confirmed Alfa Laval PHE modelsview more
NBR, EPDM and FKM options reviewed against actual service conditions
Profile matching covers sealing ribs, ports and gasket-retention... -
![Alfa Laval Compatible Gaskets]()
Alfa Laval Compatible GasketsOEM-compatible gaskets for confirmed Alfa Laval plate heat exchanger modelsview more
Compatibility verified by profile, ports, attachment method and plate position
NBR, EPDM and FKM options reviewed against actual process... -
![Alfa Laval EPDM Gaskets]()
Alfa Laval EPDM GasketsOEM-compatible EPDM gaskets for confirmed Alfa Laval PHE modelsview more
Commonly considered for suitable hot-water, HVAC and aqueous duties
Profile matching covers sealing ribs, port rings and attachment geometry
Material review... -
![Alfa Laval NBR Gaskets]()
Alfa Laval NBR GasketsOEM-compatible NBR gaskets for confirmed Alfa Laval PHE modelsview more
Commonly considered for suitable oil and industrial utility duties
Profile matching covers sealing ribs, port rings and attachment geometry
Compound review...
Alfa Laval Gasket Replacement and Model Identification
For an existing gasketed plate heat exchanger, the correct replacement gasket must match the plate model, perimeter seal, port-ring geometry and attachment method. Material compatibility is equally important.
Equipment Identification
Use the original equipment nameplate, model designation and plate information to identify the correct component family.
Materials and Retention
Review the elastomer compound and whether the existing plate uses a clip-on or bonded seal.
Compatible Aftermarket Parts
Confirm the gasket profile, operating conditions and quantity before selecting a replacement.
Replacement Gasket and Plate Sealing Examples
The following images illustrate different gasketed plate heat exchanger components. Actual replacement profiles must be verified against the original plate.
Find Your Alfa Laval Model Series
Use the following model overview image for initial equipment identification. The searchable model directory below also includes additional references from our technical product information.
Model reference chart for identification. Exact gasket compatibility must be confirmed.
Alfa Laval Gasket Model Series
Model designations from our supplied reference lists are organized into product families below. These designations help buyers identify the original equipment, but do not alone establish gasket interchangeability or current supply.
Alfa Laval M-Series Gaskets
Full equipment suffix and gasket retention design require confirmation.
Alfa Laval A-Series Gaskets
Series names are useful identification references, not a substitute for plate matching.
Alfa Laval T-Series Gaskets
Confirm plate configuration and the complete series designation.
Alfa Laval P-Series References
P-series designations are supplied as reference information. Confirm the equipment and part type.
Clip and H-Series References
Verify attachment features, gasket profile and original plate arrangement.
Additional Alfa Laval Model References
Some designations may refer to different equipment configurations. Confirm that the unit is a serviceable gasketed plate heat exchanger before requesting a gasket replacement.
Alfa Laval Model Reference A/B Values
The following A and B values are transcribed from the supplied technical reference. They are presented as identification data only.
| Model Reference | Reference A | Reference B |
|---|---|---|
| M3 | 60 | 357 |
| M6B | 140 | 640 |
| M6M | 140 | 640 |
| M10M | 225 | 719 |
| M10B | 225 | 719 |
| M15B | 298 | 1294 |
| M15M | 298 | 1294 |
| M15F | 304 | 1294 |
| MK15BW | 298 | 1044 |
| M20M | 353 | 1478 |
| M20MW | 353 | 1478 |
| MX25B | 439 | 1939 |
| MX25M | 439 | 1939 |
| M30 | 596 | 1842 |
| MA30M | 561 | 1811 |
| MA30S | 555 | 1815 |
| MA30W | 561 | 1811 |
| P13 | 165 | 800 |
| P14 | 264 | 1032 |
| P15 | 324 | 1500 |
| P16 | 530 | 1200 |
| P132 | 165 | 800 |
| P26 | 135 | 591 |
| P30 | 72 | 570 |
| P31 | 230 | 945 |
| P32 | 230 | 945 |
| P36 | 230 | 945 |
| P45 | 324 | 1200 |
| T20B | 353 | 1478 |
| T20P | 353 | 1478 |
| TL6B | 150 | 1036 |
| TL10B | 225 | 1338 |
| TS6M | 203 | 380 |
| TS20M | 363 | 698 |
| A3 | 50 | 570 |
| A10 | 290 | 1205 |
| A15B | 1350 | 1315 |
| A20B | 430 | 1550 |
| A35 | 765 | 1850 |
| AM10 | 300 | 1055 |
| AM20 | 365 | 1450 |
| AK20 | 365 | 930 |
| AX30 | 540 | 1836 |
| Clip3 | 72 | 570 |
| Clip6 | 130 | 859 |
| Clip8 | 220 | 1095 |
| Clip10 | 324 | 1324 |
| H7 | 254 | 1054 |
| H10 | 348 | 1221 |
Elastomer Compounds and Attachment Methods
Our supplied reference lists NBRB, NBRP, HNBR, EPDM, HT EPDM and VITON A/B/G among the gasket material designations. The specific compound must be checked for each exchanger model and service environment.
EPDM and HT EPDM
Considered for selected compatible water-based services. Actual temperature and chemical limits depend on the compound formulation.
NBRB, NBRP and HNBR
Nitrile-based compound references. Selection depends on fluid compatibility, mechanical properties, temperature and service conditions.
FKM / Viton Grades
Your source lists VITON A, VITON B and VITON G. Exact grade availability and chemical suitability must be confirmed.
Glue-On Gaskets
Bonded gasket configurations require an appropriate adhesive, surface preparation and curing procedure for the specified material.
Clip-On Gaskets
Mechanically retained gaskets must match the corresponding plate retention points and groove.
Gasket Fit, Plate Pack and Replacement Context
The correct replacement must work with the original plate and equipment arrangement. The following three images illustrate relevant equipment and component contexts.
Find a Replacement Gasket for Your Alfa Laval Equipment
Share the existing exchanger model and gasket configuration. We can review the details required to assess a compatible aftermarket replacement.
For general enquiries, contact our team .
Submit Your Model and Gasket Details
Include the equipment model, complete gasket photographs and required quantity. Reference A/B values may help initial identification once their measurement meaning is confirmed.
Component Storage, Packaging and Engineering Support
Our supplied facility photographs show storage, shipment preparation and engineering or after-sales working environments.
Six Checks Before Ordering Replacement Gaskets
Correct identification helps avoid purchasing an unsuitable gasket that looks similar to the original component.
Confirm the Equipment
Record the nameplate, series and complete model designation.
Inspect the Gasket Profile
Check perimeter geometry, port rings and original retention features.
Match the Plate Groove
Confirm the corresponding plate version and gasket sealing groove.
Verify the Material
Review the process media, temperature, pressure and cleaning chemicals.
Confirm Flow Arrangement
Check the original plate and port-sealing layout for the required configuration.
Confirm Supply Details
Specify gasket quantity, documentation, delivery requirements and material grade.
More Plate Heat Exchanger Products and Technical Guides
All Heat Exchanger Gaskets
Explore gasket brands, materials and replacement selection.
Browse Gaskets →Heat Exchanger Plates
Review plate geometry, materials and compatible replacement identification.
Browse Plates →Plate & Gasket Replacement
Understand replacement part matching and purchasing information.
Replacement Guide →Maintenance & Repair
Learn about leakage, gasket aging and plate-pack inspection.
Maintenance Support →Quality Control
Explore manufacturing, assembly and component handling information.
Quality Control →Technical Knowledge Center
Read technical articles about gasket materials, sealing and identification.
Technical Articles →Frequently Asked Questions
Our supplied reference lists include M, A, T, P, Clip and other model designations. The exact gasket profile and supply availability must be verified for each model.
This page concerns compatible aftermarket replacement enquiries. Brand references are used for equipment identification and do not imply original manufacture, authorization or endorsement.
Not on their own. The supplied reference does not specify the meaning or units of A and B. A verified drawing, plate details and gasket photographs are required for dimensional matching.
Material selection depends on the process medium, fluid concentration, operating temperature, pressure and cleaning conditions. The precise elastomer compound must be confirmed for the intended service.
Send the exchanger nameplate, complete gasket photographs, corresponding plate images, operating conditions and required quantity. The identification details can be reviewed before confirming a replacement option.
Looking for an Alfa Laval Replacement Gasket?
Send your complete equipment model, gasket and plate photographs, required material and quantity for an aftermarket compatibility review.
Request Gasket Matching & Quote →As one of the most professional alfa laval gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced alfa laval gaskets made in China here from our factory. Customized orders are welcome.
Alfa Laval Compatible Gaskets, Alfa Laval NBR Gaskets, Alfa Laval Viton Gaskets
