WTSML / POLARIS AFTERMARKET GASKETS

Polaris Plate Heat Exchanger Replacement Gaskets

Explore replacement sealing options for selected Polaris S-series plate heat exchangers. Our historical model reference includes 29 entries, covering compact and larger plate-pack configurations with recorded port-center measurements.

A correct replacement must match the original plate groove, port sealing route, fastening features and fluid requirements. Model suffixes and mechanical retention details are particularly important when identifying existing Polaris equipment.

Request Polaris Gasket Quote →
WTSML historical Polaris replacement plate heat exchanger gasket
Independent non-OEM gasket replacements. Polaris model names are used for existing equipment identification only. Final compatibility requires technical confirmation.
  • Polaris Viton Gaskets
    OEM-compatible FKM gaskets for confirmed Polaris plate heat exchanger models
    Designed for selected high-temperature and chemically demanding process duties
    Profile matching covers sealing ribs, port rings and attachment...
    view more
  • Polaris NBR Gaskets
    OEM-compatible NBR gaskets for confirmed Polaris plate heat exchanger models
    Commonly selected for compatible oil and industrial utility applications
    Profile matching covers gasket grooves, port rings and retaining...
    view more
  • Polaris EPDM Gaskets
    OEM-compatible EPDM gaskets for confirmed Polaris plate heat exchanger models
    Suitable for compatible water-based heating and cooling applications
    Profile matched by model, plate code, dimensions or physical sample...
    view more
  • Polaris Compatible Gaskets
    OEM-compatible gaskets developed for confirmed Polaris plate heat exchanger models
    Profile matching covers sealing ribs, port rings and attachment points
    Model identification supported by nameplate, plate dimensions or...
    view more
  • Polaris Replacement Gaskets
    OEM-compatible Polaris replacement gaskets for scheduled PHE maintenance
    Profile matching based on exchanger model, plate code or physical sample
    NBR, EPDM and FKM compounds available for different process...
    view more
  • Polaris Plate Heat Exchanger Gaskets
    OEM-compatible replacement gaskets for Polaris plate heat exchanger maintenance
    Profile and attachment method matched to the confirmed Polaris plate model
    NBR, EPDM and FKM material options for different process...
    view more
Polaris plate heat exchanger replacement gasket from historical WTSML catalog
Polaris Replacement Components

Replacement Seals for Existing Polaris Plate Packs

Polaris gasket identification begins with the installed plate pack. The exchanger model provides an initial reference, but the actual gasket must follow the correct port and perimeter sealing profile.

The historical WTSML range contains Polaris S-series references covering compact and larger plate designs. Mechanical fastening features, groove geometry and fluid conditions must be confirmed for each enquiry.

  • Independent aftermarket gasket supply
  • Historical Polaris S-series model references
  • Sealing for demountable plate exchangers
  • Glued and mechanical fixing options
  • Model-specific profile and material verification
Model and Brand Identification

Similar S-Series Model Names Do Not Prove Interchangeability

Some Polaris model references overlap with S-series designations used in other plate heat exchanger spare-part catalogs. Similar naming may help locate a reference, but cannot confirm that the seal will fit.

The complete equipment nameplate, original gasket contour and plate markings should be compared before approving any proposed substitute component.

  • Confirm the original equipment brand.
  • Record the complete S-series model suffix.
  • Inspect plate grooves and hanging features.
  • Check port-ring geometry and gasket orientation.
  • Verify replacement details against the actual sample.
Heat exchanger plate geometry close up for replacement part identification
Industrial plate heat exchanger elastomer gasket product reference
Rubber Compound Selection

NBR, HNBR, EPDM and FKM Material References

The historical Polaris product description lists NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A, B and G. Each refers to a material or historical grade option that requires verification.

The operating fluid, temperature variations, chemical additives and cleaning process must be reviewed before a specific compound is selected.

  • NBRB / NBRP: historical nitrile references
  • HNBR: hydrogenated nitrile elastomer family
  • EPDM: consider for compatible water-based duties
  • HT EPDM: grade-specific temperature confirmation
  • Viton A / B / G: fluoroelastomer references
Material caution: The historical material list is not a guarantee that each grade is available for all 29 model references. Service limits depend on the actual compound and operating conditions.
Historical Polaris Model Index

Polaris S-Series Gasket Model and HC/VC Dimensions

The tables preserve all 29 model entries supplied for this product family. HC means horizontal port-center spacing and VC means vertical port-center spacing. All figures are recorded in millimeters.

These historical dimensions support preliminary identification only. They are not certified plate or gasket drawings and do not independently establish compatibility.

Polaris S4A to S22

Polaris Model HC (mm) VC (mm)
S4A 70 381
S7A 126 394
S8A 70 656
S8 70 656
S15 126 694
S19A 192 700
S20 126 894
S20A 126 894
S21 225 719
21A* 225 719
S22 225 719

Polaris S30 to S50

Polaris Model HC (mm) VC (mm)
S30 202 950
S35 280 800
S37 238 1441
S38A — —
S39 202 1150
S41 296 890
S41A 296 890
S43 395 791
S47 225 1365
S50 202 1450

Polaris S62 to S121

Polaris Model HC (mm) VC (mm)
S62 296 1292
S64 225 1771
S65 395 1091
S65A 395 1091
S81 480 1080
S100 395 1489
S120 480 1490
S121 480 1490
Missing and ambiguous references: S38A has no HC/VC figures in the supplied historical record. The model marked 21A* is reproduced exactly as provided without an S prefix. Confirm whether the actual equipment designation is S21A before using it for a manufacturing order. No dimensions have been invented.
Dimension verification: Models sharing identical HC/VC measurements may still have different plate profiles, gasket grooves, retention features or sealing paths. Always check the original equipment and gasket sample.
Mechanical Gasket Retention

Hang-On, Lock and Snap Retention Considerations

Polaris aftermarket parts catalogs describe different mechanical fixing systems for certain S-series models. These include hang-on, locking and snap-style configurations.

A gasket cannot be selected merely by rubber material or port spacing. The attachment design must match the original plate-edge and groove features.

  • Check whether the original gasket is glued.
  • Inspect clips, tabs and fastening slots.
  • Identify any proprietary locking geometry.
  • Photograph corners and port-ring connections.
  • Confirm the actual retention type before ordering.
Mechanical lock type gasket attachment illustration
Illustration scope: The image demonstrates a gasket locking concept. It does not establish that every Polaris model uses the exact illustrated mechanism.
Clip-on gasket attachment illustration for plate heat exchangers
Replacement Seal Identification

Recognize the Correct Gasket Fixing Features

When a legacy plate pack is opened, the original seal provides important physical evidence. Clips, locating tabs, groove shape and gasket orientation should be recorded before the old component is discarded.

If the exchanger model is uncertain, photographs and measured dimensions may help narrow the matching options. A physical sample may still be necessary for final confirmation.

  • Photograph the entire removed gasket.
  • Record full plate and frame markings.
  • Check the gasket route around each port.
  • Identify glue residue or mechanical fasteners.
  • Confirm the required compound and quantity.
WTSML / POLARIS GASKET ENQUIRY

Request Polaris S-Series Replacement Gaskets

Send the complete Polaris model and nameplate, original plate and gasket photographs, fixing method, process fluid, operating temperatures, required material, quantity and delivery destination for a replacement review.

Submit Polaris Gasket RFQ →
Maintenance and Stock Preparation

Reduce Incorrect Spare-Part Orders During Shutdown Planning

For plants operating several generations of plate heat exchangers, a maintenance schedule may involve similar S-series model names with different actual sealing components.

A clear spare-part list should distinguish each exchanger by nameplate, plate-pack configuration, gasket compound and retention type. This reduces uncertainty when preparing a replacement order.

  • Maintain a separate record for each installed unit.
  • Confirm the number of plates and gasket sets.
  • Identify any special end-position seals.
  • State the planned shutdown date.
  • Agree delivery and documentation requirements.
WTSML industrial facility image
Replacement Purchasing Checks

Three Verification Steps Before Ordering

01. Equipment Identity

Confirm the actual brand, complete S-series model, nameplate details and any relevant plate markings.

02. Gasket Specification

Verify physical fit, retention features, compound formulation, fluids and operating conditions.

03. Order Conditions

Agree quantity, inspection requirements, material records, delivery schedule and warranty terms for the specific order.

Historical technical and commercial information: The original description mentions a post-curing process of four hours at 160°C, ISO9001:2000 and a one-year warranty. These are historical references only. They do not establish a universal gasket working temperature, an active certification or automatic warranty terms for current orders.
Polaris Gasket FAQ

Frequently Asked Questions

1. Are these original Polaris OEM gaskets?

No. This category describes independent aftermarket replacement gaskets. Polaris names are used to identify existing equipment.

2. Can Polaris and SONDEX gaskets with similar model names be interchanged?

Not based on the model name alone. The original equipment, plate profile, gasket groove, fastening features and sealing route must be compared before compatibility can be confirmed.

3. What do HC and VC mean in the Polaris model table?

HC is horizontal port-center spacing and VC is vertical port-center spacing, as recorded in millimeters in the historical model data.

4. Can every Polaris gasket use the same clip-on or lock system?

No. Retention methods vary by the actual plate construction. The replacement must match the original fixing features or an approved alternative.

5. What information should be submitted for a Polaris gasket quote?

Provide the full model, nameplate, original gasket and plate photos, material requirement, fluid and temperature conditions, order quantity and destination.

Related WTSML Products

Replacement Gaskets, Plates and Complete Heat Exchangers

During replacement work, inspect the plate grooves, corrugated surfaces and frame condition. A new gasket will not necessarily resolve leakage caused by damaged metal components or incorrect plate-pack assembly.

As one of the most professional polaris gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced polaris gaskets made in China here from our factory. Customized orders are welcome.

Send Inquiry
Send Inquiry