Funke Heat Exchanger Gaskets by FP & FPS Model Series
Explore compatible aftermarket replacement gaskets for existing Funke gasketed plate heat exchangers. Our technical model references cover selected FP and FPS series, including FP05, FP08, FP14, FP40, FP60 and other models.
Correct gasket identification requires the complete exchanger model, corresponding plate groove, attachment configuration and suitable elastomer compound. Browse the products below or send your model and component photographs for review.
-
Funke Viton GasketsOEM-compatible FKM (Viton) replacement gaskets designed for Funke plate heat exchangers operating in high-temperature and chemically demanding processes.view more
Manufactured to help extend maintenance intervals and support reliable... -
Funke NBR GasketsOEM-compatible NBR replacement gaskets designed for Funke plate heat exchangers handling lubricants, hydraulic oils and other petroleum-based media.view more
Manufactured for stable compression, reliable sealing and consistent fit during... -
Funke EPDM GasketsOEM-compatible EPDM replacement gaskets for Funke plate heat exchangers used in hot water, steam and hygienic processing systems.view more
Formulated for reliable sealing during frequent CIP cleaning and routine thermal sanitation... -
Funke Compatible GasketsOEM-compatible replacement gaskets developed through profile verification, dimensional analysis and reverse engineering.view more
Compatible with a wide range of Funke plate heat exchanger models, including legacy and discontinued... -
Funke Replacement GasketsOEM-compatible replacement gaskets manufactured for a broad range of Funke plate heat exchanger models.view more
Consistent dimensions, controlled rubber compounds and stable production for repeat orders.
Ideal for distributors,... -
Funke Plate Heat Exchanger GasketsPrecision-manufactured replacement gaskets compatible with a wide range of Funke plate heat exchanger models.view more
Designed to support planned maintenance with reliable sealing performance and consistent dimensional accuracy....
Funke Heat Exchanger Gasket Identification and Replacement
Replacement gaskets for Funke gasketed plate heat exchangers must correspond to the existing plate sealing groove, port layout, retention features and operating duty. Identifying the full FP or FPS model is the first step.
FP / FPS Model Matching
Check the exchanger nameplate, complete series designation and original gasket geometry.
Glue-On or Clip-On
Confirm whether the original sealing component uses adhesive bonding or mechanical retention.
EPDM, NBR, HNBR & FKM
Review material compatibility against fluid chemistry, temperature and cleaning media.
Funke Replacement Gasket Product References
Compare component photographs with the existing gasket profile. Exact matching requires the original plate model and sealing details.



Funke FP Model Identification Overview
The model chart provides a visual reference for identifying existing equipment. The searchable lists and HC / VC technical values below provide additional detail.
Model identification reference only. Confirm the actual plate and gasket configuration before ordering.
Funke FP and FPS Replacement Gasket References
The following list combines model references from our gasket model documentation with additional historical equipment references. A model listing does not confirm current stock.
FP04 to FP16
FP10 is recorded in the historical dimensional reference. Exact gasket availability requires verification.
FP19 to FP50
Confirm the original plate type, gasket groove and mounting arrangement.
FP60 to FP112
These are gasket model reference names, not interchangeable variants.
FP205 and Higher References
Complete model and plate information is required for matching.
Historical FPS References
The historical list supplies FPS120 dimensions and other FPS model names. These require separate supply confirmation.
Other Funke Models
Send your original exchanger nameplate, plate photos, complete gasket outline and required quantity.
Request Model Matching →Funke FP / FPS HC and VC Reference Dimensions
The following historical product reference identifies HC and VC values in millimetres. Measurements should be verified against the original plate documentation.
| Funke Model | HC (mm) | VC (mm) |
|---|---|---|
| FP04 | 65 | 336 |
| FP05 | 70 | 381 |
| FP08 | 65 | 675 |
| FP09 | 70 | 676 |
| FP10 | 126 | 494 |
| FP14 | 135 | 590 |
| FP16 | 126 | 694 |
| FP20 | 135 | 819 |
| FP22 | 126 | 894 |
| FP31 | 225 | 894 |
| FP40 | 225 | 1141 |
| FP41 | 290 | 941 |
| FP50 | 450 | 1080 |
| FP60 | 290 | 1306 |
| FP80 | 290 | 1671 |
| FP205 | 225 | 719 |
| FPS120 | 180 | 1490 |
Plate Groove, Port Sealing and Retention Compatibility
Replacement gasket performance depends on matching geometry, elastic compression and suitable process conditions.
Plate Sealing Geometry
The gasket perimeter must correspond to the original plate groove and sealing path.
Fluid Separation
Check the gasket port rings and fluid routing against the existing plate pack.
Glue-On and Clip-On
Confirm whether the original gasket is bonded or secured by mechanical features.
EPDM, NBR, HNBR and FKM Funke Gasket Materials
The historical product reference lists NBRB, NBRP, HNBR, EPDM, HT EPDM and Viton A, B and G. Compound compatibility depends on actual service conditions.
EPDM / HT EPDM
Considered for selected compatible water-based duties. Check temperature and fluid compatibility.
NBR / HNBR
Nitrile-based elastomers may be considered for selected compatible industrial media. Confirm the formulation.
FKM / Viton Grades
Selection depends on the specific chemical, temperature and elastomer grade.
Need Compatible Funke Replacement Gaskets?
Send the original model and gasket details so the required replacement configuration can be reviewed.
Submit Your Funke Gasket Details
Include the complete exchanger model, gasket photographs, operating conditions and required quantity.
Component Storage, Packing and Engineering Support
Our site photographs show storage, shipment preparation and engineering and after-sales working environments.



Six Checks Before Ordering Funke Replacement Gaskets
Confirm the Model
Identify the complete FP or FPS model and suffix.
Inspect the Plate
Check plate geometry, sealing groove and ports.
Review HC / VC
Compare dimensional references only with confirmed datum points.
Check Attachment
Identify bonded, clip-on or other retention arrangements.
Verify Material
Consider fluids, temperature, pressure and cleaning chemicals.
Confirm Quantity
Specify gasket quantity, documentation and destination.
More Plate Heat Exchanger Replacement Support
Plate & Gasket Replacement
Understand replacement identification and selection.
Replacement Support →Frequently Asked Questions
Our model documentation includes selected FP designations such as FP05, FP08, FP14, FP40, FP60, FP205 and FP405. Additional FPS references require individual review.
The historical reference labels HC and VC values in millimetres. The measurement datums and tolerances have not been established from the supplied text. Confirm the original drawing before using these values for matching.
Not automatically. The attachment method, plate groove and sealing profile must match the original configuration.
Review the process medium, concentration, operating temperature, pressure and cleaning chemicals. Confirm the specific compound and its suitability for the duty.
This page covers compatible aftermarket replacement enquiries. Funke names identify existing equipment and do not imply original manufacture, authorization or endorsement.
Looking for Funke FP or FPS Replacement Gaskets?
Share the exact exchanger model, gasket profile, plate images, material requirements and quantity for compatible replacement review.
Request Funke Gasket Matching →As one of the most professional funke gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced funke gaskets made in China here from our factory. Customized orders are welcome.
Funke Compatible Gaskets, Funke NBR Gaskets, heat exchanger gaskets
