LHE Replacement Gaskets for HT-Series Plate Heat Exchangers
Explore compatible replacement gaskets for existing LHE gasketed plate heat exchangers. Our documented product references include HT122, HT151, HT201, HT202, HT232 and HT352 for equipment maintenance and spare-parts enquiries.
Correct gasket matching depends on the complete equipment model, original plate sealing groove, retention system and elastomer compatibility. Review the products below and compare reference dimensions before requesting a quote.
-
LHE Viton GasketsOEM-compatible Viton (FKM) replacement gaskets manufactured by WTSML for LHE plate heat exchangers operating in chemically aggressive process environments.view more
Designed for applications involving solvents, acids, cleaning agents and... -
LHE NBR GasketsOEM-compatible NBR replacement gaskets manufactured by WTSML for LHE plate heat exchangers used in industrial oil cooling and process systems.view more
Designed to support reliable sealing while helping maintenance teams identify and... -
LHE EPDM GasketsOEM-compatible EPDM replacement gaskets manufactured by WTSML for LHE plate heat exchangers used in water-based and hygienic process systems.view more
Designed to support planned preventive maintenance and consistent sealing performance... -
LHE Compatible GasketsOEM-compatible replacement gaskets manufactured by WTSML for LHE plate heat exchangers with stable quality and repeatable production.view more
Suitable for companies building a second-source supply strategy to reduce procurement risk and... -
LHE Replacement GasketsOEM-compatible replacement gaskets manufactured by WTSML for LHE plate heat exchangers across industrial heating and cooling applications.view more
Ideal for scheduled maintenance, equipment refurbishment and extending the service life of... -
LHE Plate Heat Exchanger GasketsOEM-compatible replacement gaskets manufactured by WTSML for LHE plate heat exchangers used across industrial heating and cooling systems.view more
Designed to support reliable sealing, planned maintenance and lower lifecycle operating...
Compatible Replacement Gaskets for LHE Plate Heat Exchangers
LHE heat exchanger gasket replacement requires matching the original plate sealing geometry, port rings, retention features and process conditions. The equipment model is an important starting point, but it is not the only compatibility criterion.
This technical hub covers selected HT-series gasket references, manufacturer-published plate dimension data, material selection and maintenance procurement guidance.
LHE HT-Series References
Identify the full exchanger model and compare existing plate and gasket information before ordering.
Profile & Retention Matching
Confirm perimeter seals, port-ring geometry, attachment points and the corresponding plate groove.
Material Compatibility
Choose the gasket compound by fluid chemistry, working temperature, pressure and cleaning conditions.
Plate Heat Exchanger Gasket and Sealing Component References
These photographs illustrate general replacement gasket configurations. They are not verified LHE-specific product photographs. Confirm the exact HT-series gasket using its model and original component.



LHE HT122, HT151, HT201, HT202, HT232 and HT352 Gaskets
The following six models appear in WTSML's historical LHE gasket product references and have corresponding A/B dimensions in the LHE manufacturer's technical documentation.
LHE HT122
Check the existing plate groove, gasket attachment and service medium.
LHE HT151
Compare the original gasket profile and port-sealing design.
LHE HT201
Confirm the complete designation and the correct retaining features.
LHE HT202
Match the exact plate arrangement, gasket outline and elastomer grade.
LHE HT232
Use manufacturer reference dimensions and original component photos for preliminary identification.
LHE HT352
Review sealing geometry, material compatibility and the existing exchanger condition.
LHE HT-Series Plate Dimensions A and B (mm)
The following dimensions are taken from LHE's published "Dimension of Plate & Gasket" technical reference. Only the six matching models with complete A and B values are shown here.
| LHE Model | A (mm) | B (mm) |
|---|---|---|
| HT122 | 488 | 1414 |
| HT151 | 595 | 1271 |
| HT201 | 595 | 1271 |
| HT202 | 595 | 1745 |
| HT232 | 746 | 1571 |
| HT352 | 996 | 2387 |
View LHE Technical Dimension Chart →
How to Match an LHE Replacement Gasket Correctly
A reliable replacement process checks both equipment identification and physical component geometry before selecting an elastomer.
Identify the HT Model
Record the complete nameplate designation and any plate or gasket markings.
Check the Sealing Groove
Compare the full gasket outline, cross-section, plate groove and port rings.
Verify Attachment Features
Identify the original bonded or mechanical fixing method. Not every attachment system can be interchanged.
Check Port Sealing
Verify the sealing pattern for the correct plate and operating circuit.
Confirm Elastomer Compatibility
Review both fluids, temperatures, pressures, additives and cleaning chemicals.
Assess Plate Condition
Inspect the sealing groove, corrosion, cracks and plate-pack condition before regasketing.
LHE Replacement Gasket Materials: NBR, HNBR, EPDM & FKM
WTSML's historical LHE product references include NBRP, HNBR, FPM, NBR, EPDM and EPDM-HT. Material availability and chemical suitability depend on the model and application.
NBR / NBRP
Consider nitrile elastomers for selected compatible media. Check the exact compound, fluid composition and operating temperature.
HNBR
HNBR may be considered where its specific temperature, oil-resistance and service characteristics match the application.
EPDM / High-Temperature EPDM
Often considered for selected compatible water-based duties. Confirm the specific grade and limits under actual operating conditions.
FKM / FPM
Some applications require fluoroelastomer compounds. Verify the exact chemical resistance and temperature range for the grade offered.
Fluid and Cleaning Compatibility
Check normal operation, start-up, shutdown and cleaning-in-place exposure.
Material Grade Verification
Specify the requested compound where known and verify final suitability before procurement.
Need Replacement Gaskets for an LHE Heat Exchanger?
Send your LHE equipment identification and original gasket information so the replacement requirements can be reviewed.
Other enquiries: Contact Us .
Submit Your LHE Gasket Requirements
Include the equipment model, gasket photographs, operating conditions and required quantity.
Component Storage, Packaging and Engineering Support
Our facility photographs show replacement component storage, order preparation and technical support operations.



Six Checks Before Ordering LHE Replacement Gaskets
A structured replacement enquiry helps confirm the right component and avoid incorrect parts procurement.
Identify the Equipment
Confirm the exact LHE model and nameplate.
Inspect the Original Gasket
Document the complete profile, port rings and retention features.
Review Reference Dimensions
Compare manufacturer A/B figures with the relevant plate drawing.
Confirm Material
Review process and cleaning conditions before selecting elastomer.
Specify the Gasket Set
Provide plate quantity, required gasket count and any spare allowance.
Confirm Order Details
Review the final matching, quantity, documentation and destination.
More Heat Exchanger Replacement Support
Plate & Gasket Replacement
Prepare the details needed for replacement part matching.
Replacement Support →Maintenance & Repair
Read about gasket wear, leakage and plate-pack maintenance.
Maintenance Guide →Frequently Asked Questions
Our documented model references include HT122, HT151, HT201, HT202, HT232 and HT352. HT151L is also noted for separate identification. Compatibility and availability must be verified individually.
Not automatically. The published A/B dimensions are the same for both models, but the original gasket profile, port sealing, plate groove and retention arrangement must be checked separately.
A and B are the dimensions labelled on LHE's original plate outline drawing. They are expressed in millimetres and are not automatically gasket port-centre or HC/VC measurements.
Review the process medium, concentration, operating temperature, pressure and cleaning chemicals. NBR, HNBR, EPDM and FKM have different compound-specific limits.
This category covers compatible aftermarket replacement enquiries. LHE model names identify existing equipment and do not imply original manufacture, endorsement or authorization.
Looking for LHE HT-Series Replacement Gaskets?
Send your full LHE model, gasket and plate photographs, operating conditions and required quantity for compatible replacement review.
Request LHE Gasket Matching →As one of the most professional lhe gaskets manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced lhe gaskets made in China here from our factory. Customized orders are welcome.
LHE Compatible Gaskets, lhe gaskets, LHE NBR Gaskets
