What Are The Quality Requirements For Heat Exchanger Plates?

Apr 15, 2026

Leave a message

Corrugated Depth and Gasket Groove Depth Deviation

The corrugated depth and gasket groove depth deviations of the plates should conform to specific specifications (see table below). Precise control of these deviations is crucial for ensuring the heat exchanger's heat exchange efficiency and sealing performance.

 

Surface Quality

The plate surface must not have defects such as pits, scratches, or indentations exceeding the thickness tolerance. These defects will affect heat exchange efficiency and plate durability.

 

Peripheral and Corner Hole Treatment

Burnt burrs from the plate's periphery and corner holes should be thoroughly removed to avoid damage to the gaskets and the plate itself during assembly and use.

 

Special Requirements for the Food Industry

For plates used in the food industry, the surface roughness of the working surface after stamping should not be worse than that of the original sheet material. This is to ensure that food is not contaminated due to plate surface roughness during food handling.

 

Specific Values ​​for Corrugated Depth Deviation and Gasket Groove Depth Deviation

The corrugated depth deviation should not exceed 0.20 mm, and the gasket groove depth deviation should also not exceed 0.20 mm. These stringent deviation controls help ensure the heat exchanger's sealing performance and heat exchange efficiency.

Send Inquiry
Send Inquiry