When Are Stainless Steel Plates Suitable for a Funke Heat Exchanger?
Funke stainless steel plates can be considered for compatible water, HVAC, food-processing and general industrial duties. Final selection depends on both process streams, chloride content, temperature, concentration and cleaning chemicals. The replacement must also match the installed plate geometry and position.
Common Selection Conditions
Stainless steel may provide a practical material option where the verified process chemistry remains within the selected alloy's corrosion resistance.
- Compatible closed-loop heating and cooling water
- Suitable food and beverage process duties
- General industrial heating and heat recovery
- Selected utility-water applications
Conditions Requiring Review
Stainless steel is not automatically suitable for every aqueous or hygienic process. Water chemistry and cleaning conditions may change corrosion risk.
- Seawater or elevated chloride concentration
- Unknown water chemistry or contamination
- Aggressive acidic or alkaline cleaning
- Previous pitting, thinning or plate perforation
Funke Stainless Steel Plate Selection Details
Confirm the stainless steel specification, operating duty and plate geometry before approving production.
| Equipment identification | Provide the Funke heat exchanger model, nameplate, serial information and available plate-pack records. |
|---|---|
| Stainless steel grade | Confirm the existing grade from plate markings or equipment records rather than surface appearance. |
| Process fluids | Identify both fluid streams, concentration, contaminants, additives and relevant pH conditions. |
| Chloride exposure | State chloride content in process water, cooling water, product media and cleaning solutions where applicable. |
| Temperature range | Provide normal, start-up, maximum and cleaning temperatures for both sides of the exchanger. |
| Plate geometry | Confirm overall dimensions, ports, hanging features, corrugation pattern and gasket-groove design. |
| Plate position | Identify start, channel, turning or end configurations and the required open or closed ports. |
| Order scope | Specify quantities for each plate configuration and whether compatible gaskets are also required. |
Grade confirmation: The exact stainless steel grade must be agreed from the installed plate and process conditions. No single stainless alloy is suitable for every fluid, chloride level or temperature.
Inspect the Failed Plate Before Reordering
The location and appearance of damage help determine whether the same stainless steel specification remains appropriate.
Pitting and Pinholes
Localized penetration can indicate chloride exposure, deposits or chemistry exceeding the material's resistance.
Crevice Attack
Damage near deposits or gasket grooves can require review of fouling, cleaning and local fluid conditions.
General Thinning
Wider metal loss can indicate incompatible chemistry, prolonged exposure or an unsuitable cleaning procedure.
Photograph both plate faces before cleaning, identify the hot and cold sides, and record where each damaged plate was installed.
When Should Another Plate Material Be Evaluated?
A material change should address an identified corrosion mechanism. Fluid chemistry, temperature, cleaning conditions and connected materials must be considered together.
Continue with Stainless Steel
This may be appropriate when the existing grade is verified and the failure was unrelated to material corrosion.
Evaluate Titanium
Titanium is often considered for seawater or chloride-bearing media, subject to complete chemistry and temperature review.
Evaluate Another Alloy
Nickel-based or other specialized materials may be required for chemistry unsuitable for stainless steel or titanium.
When changing plate material, review compatible gaskets, cleaning agents, connected materials and possible mixed-metal effects.
The Correct Alloy Must Also Match the Plate Pack
A stainless steel plate cannot be approved by material alone. Formed geometry determines whether it fits, seals and creates the correct flow channel.
Frame and Port Fit
Overall dimensions, hanging points, port diameter and port-center spacing must align with the existing exchanger.
Corrugation Geometry
Pressing pattern and orientation must provide the required channel arrangement and support against adjacent plates.
Gasket Interface
The gasket groove and sealing path must accept the intended gasket and compress correctly inside the closed frame.
Information Needed for Accurate Matching
Record Equipment Data
Send the Funke model, nameplate photograph, serial information and current plate quantity.
Photograph Both Faces
Provide complete plate images and close-ups of ports, corners, groove and hanging features.
Measure the Plate
Record length, width, port diameter, port-center distances and available thickness information.
Confirm the Material
Provide visible markings, equipment records or previous purchase information identifying the alloy.
Describe the Process
List both fluids, chlorides, temperature, pressure, concentration and cleaning chemicals.
Define the Order
State plate positions, quantities, gasket requirements, packaging and destination country.
Protect Formed Stainless Steel Plates During Maintenance
Inspection and controlled handling protect thin plate surfaces, formed geometry and gasket-sealing areas.
Receiving Checks
- Compare geometry with the approved plate sample
- Confirm material identification and quantity
- Inspect edges, ports and hanging features
- Check gasket grooves for contamination or damage
- Keep different plate positions separately labeled
Assembly Checks
- Restore the recorded plate sequence and orientation
- Use gaskets compatible with the operating duty
- Keep sealing paths clean during installation
- Close the frame evenly to the required dimension
- Recommission gradually while monitoring for leakage
Stainless Steel Plate Supply for Maintenance and Distribution
WTSML manufactures plate heat exchanger components in a 3,500 m² facility with precision stamping, rubber molding, CNC machining and final-inspection workshops. Production processes operate under an ISO 9001-certified quality management system.
Specification Review
Plate geometry, material information and operating conditions are reviewed before order confirmation.
Combined Spare Parts
Stainless steel plates and compatible Funke gaskets can be evaluated together for maintenance.
OEM Order Options
Private labeling and customized packaging are available according to confirmed purchasing requirements.
Funke Stainless Steel Plates FAQ
Which stainless steel grade is used for Funke replacement plates?
The grade must be confirmed from the installed plate, equipment records and process conditions. Provide material markings, fluid chemistry, chlorides, temperature and cleaning chemicals.
Are stainless steel plates suitable for seawater?
Standard stainless steel can face significant corrosion risk in seawater or elevated-chloride service. Titanium or another material should be evaluated using the complete water chemistry and temperature.
Can one corroded Funke stainless steel plate be replaced?
Individual replacement may be possible when the damage is localized and the exact configuration is identified. The corrosion cause and condition of the remaining plates should also be assessed.
How are Funke stainless steel plates identified?
Identification uses the equipment model, nameplate, plate markings, overall dimensions, ports, corrugation pattern, gasket groove and plate-pack position.
Can matching gaskets be supplied with stainless steel plates?
Compatible gaskets can be evaluated with the plates. Confirm the gasket attachment method, process fluids, operating temperature and cleaning chemicals.
Are these original Funke stainless steel plates?
No. They are independently manufactured aftermarket plates intended for verified Funke heat exchanger configurations. The Funke name identifies equipment compatibility only.
Confirm Your Funke Stainless Steel Plate Specification
Send the nameplate, plate photographs, dimensions, existing alloy, fluid chemistry, chlorides, operating conditions, quantity and destination country.
Hot Tags: funke stainless steel plates, China funke stainless steel plates manufacturers, suppliers


