Funke Plate Heat Exchanger Plates

Funke Plate Heat Exchanger Plates

Replacement heat transfer plates for identified Funke plate heat exchanger configurations.
Plate dimensions, ports, corrugation and gasket groove are checked before production.
Available materials are selected according to fluid chemistry and operating conditions.
Supports targeted plate replacement without changing the complete heat exchanger.
Individual plates, matched positions and maintenance quantities can be evaluated.
Sample photographs and measurements support unidentified or legacy plate matching.
Compatible Funke gaskets can be supplied according to sealing requirements.
Independently manufactured aftermarket components, not original Funke products.
Send Inquiry
Description
Compatible Replacement Components

What Must Match When Selecting Funke Heat Exchanger Plates?

Funke plate heat exchanger plates form alternating channels for the hot and cold media. A replacement plate must match the installed plate outline, hanging features, port arrangement, corrugation pattern, gasket groove and plate-pack position. Its material must also suit the process fluids, temperature and cleaning conditions.

For Planned Plate-Pack Maintenance

Individual plates or larger maintenance quantities can be evaluated when inspection identifies corrosion, cracking, deformation, damaged ports or unusable gasket grooves.

  • Replace identifiable damaged plate positions
  • Restore the recorded plate sequence
  • Pair plates with correctly matched gaskets
  • Retain the required compressed pack dimension

For Unidentified or Legacy Plates

A model reference may not identify every plate detail. A clean sample, measured dimensions and clear photographs reduce the risk of ordering an incorrect configuration.

  • Funke equipment model and nameplate data
  • Full photographs of both plate faces
  • Plate dimensions and port-center distances
  • Existing material and required quantity
Technical Specification

Funke Plate Heat Exchanger Plate Selection Details

Confirm the complete plate specification before production rather than relying only on the equipment brand or outside dimensions.

Equipment identification Provide the Funke heat exchanger model, serial information, nameplate photograph and available plate-pack records.
Plate dimensions Confirm overall length and width, port diameter, port-center distances and hanging-point geometry.
Corrugation pattern The pressing geometry and orientation must reproduce the intended channel arrangement in the existing plate pack.
Port configuration Identify the required open or closed ports and their relationship to the plate's position in the pack.
Gasket interface Confirm gasket groove geometry, sealing path, attachment method and compatible elastomer.
Plate material Select stainless steel, titanium or another suitable alloy according to both fluid streams and cleaning conditions.
Operating conditions State both fluids, concentration, chlorides, normal and maximum temperature, pressure and cleaning chemicals.
Order scope Specify individual plates, position-specific replacements or a larger plate-pack maintenance requirement.

Compatibility notice: These are independently manufactured aftermarket components. "Funke" is used only to identify the equipment compatibility being evaluated and does not indicate manufacture or authorization by the brand owner.

Mechanical Compatibility

Six Plate Features Require Verification

A plate that fits between the frame bars may still be incompatible if its ports, formed pattern, sealing path or plate position differ.

01

Plate Outline

Length, width, corner profile and frame contact features must correspond to the installed exchanger.

02

Hanging Features

Upper and lower locating details must align with the frame and hold the plate in the correct position.

03

Port Layout

Port diameter, center spacing and open or closed combinations determine how the fluids enter each channel.

04

Corrugation

Pressing pattern and direction influence channel formation, plate support, pressure drop and heat transfer.

05

Gasket Groove

The groove must accept the intended gasket profile and preserve the required sealing path under compression.

06

Plate Position

Start, channel, turning and end positions may use different port openings or gasket arrangements.

Material Selection

Choose Plate Material from the Process Conditions

The existing plate material is an important reference. If plates failed through corrosion, confirm the damage mechanism before repeating the same material.

Stainless Steel

Commonly evaluated for compatible water, HVAC, food-processing and general industrial duties. Chlorides, temperature and cleaning media require review.

Titanium

Often considered for seawater or chloride-bearing media where verified conditions require greater corrosion resistance. It is not universal for every chemical.

Other Alloys

Nickel-based or other specialized materials may be evaluated for chemistry that is unsuitable for standard plate materials.

When changing plate material, review gasket compatibility, connected materials, cleaning agents and possible mixed-metal effects before approval.

Identification Workflow

Prepare a Funke Plate Inquiry in Six Steps

1

Record the Nameplate

Photograph the complete equipment nameplate and note the model, serial information and current plate quantity.

2

Preserve the Sequence

Record plate orientation, port configuration and position before dismantling the plate pack.

3

Clean a Sample

Remove deposits carefully so plate markings, corrugations and gasket-groove details remain visible.

4

Photograph Both Faces

Provide square photographs of the complete plate and close-ups of ports, corners and hanging features.

5

Measure Key Features

Record overall dimensions, port diameter, center distances and any identifiable material or thickness marking.

6

Describe the Duty

List both media, temperature, pressure, cleaning method, required quantity and destination country.

Plate-Pack Configuration

Confirm Position Before Ordering Replacement Plates

Gasketed heat exchanger plates work as an arranged pack. Port openings, orientation and gasket paths determine how each plate directs the hot and cold media.

Channel Plates

Alternating orientation forms the heat-transfer channels. Adjacent corrugations and gasket paths must correspond correctly.

Turning Plates

Multi-pass configurations may require plates with different port openings to redirect the process stream.

Terminal Positions

Start and end arrangements can differ from regular channel plates and must be identified separately.

Receiving and Reassembly

Check the Plates Before Returning the Unit to Service

Receiving inspection and controlled assembly help protect thin formed plates and prevent errors in orientation, sealing or plate-pack compression.

Receiving Inspection

  • Compare the geometry with the approved sample
  • Confirm plate material, positions and quantities
  • Inspect edges, ports and hanging features
  • Check gasket grooves for damage or contamination
  • Keep different configurations separately labeled

Plate-Pack Assembly

  • Restore the recorded sequence and orientation
  • Use gaskets matched to the grooves and fluids
  • Keep all sealing surfaces clean
  • Close the frame evenly to the required dimension
  • Recommission gradually while checking for leakage
Manufacturing Support

Replacement Plate Supply for Maintenance and Distribution

WTSML manufactures plate heat exchanger components in a 3,500 m² facility with precision stamping, rubber molding, CNC machining and final-inspection workshops. Production processes operate under an ISO 9001-certified quality management system.

Specification Review

Plate identification, dimensions and operating conditions are reviewed before the replacement specification is confirmed.

Combined Parts Orders

Replacement plates and matching Funke gaskets can be evaluated together for planned maintenance.

OEM Order Options

Private labeling and customized packaging are available according to confirmed purchasing requirements.

Buyer Questions

Funke Plate Heat Exchanger Plates FAQ

What information is needed to identify a Funke replacement plate?

Provide the equipment nameplate, model and serial information, photographs of both plate faces, dimensions, port measurements, visible markings, existing material and required quantity.

Can one damaged Funke heat exchanger plate be replaced?

An individual plate may be replaceable when its geometry, material, port configuration and plate-pack position can be identified. The remaining plates and gaskets should also be inspected.

Does matching the plate dimensions guarantee compatibility?

No. Corrugation geometry, hanging features, port layout, gasket groove, orientation and plate position must also match the installed configuration.

Which material should be selected for Funke heat exchanger plates?

Material selection depends on both fluid streams, chlorides, pH, concentration, temperature and cleaning chemicals. Confirm the existing alloy and explain any corrosion failure before reordering.

Can compatible gaskets be supplied with Funke plates?

Compatible gaskets can be evaluated with the plates. Provide the gasket attachment method, process fluids, temperatures and cleaning conditions so the profile and elastomer can be checked.

Are these original Funke plates?

No. They are independently manufactured aftermarket components intended for verified Funke heat exchanger configurations. The Funke name identifies equipment compatibility only.

Request Matching for Your Funke Plate Requirement

Send the equipment nameplate, plate photographs, dimensions, material, plate position, operating conditions, required quantity and destination country.

Get Plate Matching & Quote

Hot Tags: funke plate heat exchanger plates, China funke plate heat exchanger plates manufacturers, suppliers

Send Inquiry
Send Inquiry