Sondex EPDM Gaskets

Sondex EPDM Gaskets

EPDM replacement gaskets for identified Sondex plate heat exchanger configurations.
Commonly evaluated for water, hot-water, HVAC, and compatible aqueous duties.
Profiles matched to sealing grooves, port rings, diagonals, vents, and retaining features.
Water additives, glycol type, temperature, pressure, and cleaners reviewed before selection.
Identification supported by nameplate data, plate markings, dimensions, photos, or samples.
Clip-on, snap-in, inserted, or glued designs supplied where the plate permits.
Complete gasket sets available for maintenance, refurbishment, and spare-parts inventory.
OEM labeling and customized packaging options available by order confirmation.
Send Inquiry
Description
Aqueous-service gasket selection

Sondex EPDM Gaskets for Confirmed Water and HVAC Duties

Sondex EPDM gaskets are independently manufactured replacement seals for compatible gasketed plate heat exchanger configurations. EPDM is commonly evaluated for water, hot-water, HVAC, and compatible aqueous duties, while the gasket profile must match the plate groove, port seals, vent arrangement, and retaining features.

Applications Commonly Evaluated

  • Closed-loop heating and cooling water
  • HVAC and building-service circuits
  • Compatible process-water applications
  • Selected glycol-water mixtures after full review
  • Replacement of an existing verified EPDM set

Conditions Requiring Review

  • Hydrocarbon oils, fuels, and oily contamination
  • Unknown glycol type or additive package
  • Corrosion inhibitors and water-treatment chemicals
  • Concentrated or mixed cleaning chemicals
  • Operating conditions outside the recorded service range
EPDM is generally unsuitable for hydrocarbon oils and fuels. If either exchanger circuit can contain oil, fuel, lubricant, or solvent contamination, include it in the material review.
Water-system variables

What Must Be Confirmed for EPDM Selection

Service factor Information to provide Why it matters
Water circuit Water source, treatment method, dissolved chemicals, and possible contaminants Water chemistry can affect material suitability and gasket aging.
Glycol Glycol type, concentration, brand or formulation, and inhibitor package Glycol mixtures are not interchangeable without checking their complete formulation.
Temperature Normal, maximum, cleaning, start-up, and shutdown temperatures Temperature affects elasticity, aging, and compression retention.
Pressure Normal pressure, peak pressure, fluctuations, and pump cycling Pressure cycles affect sealing contact and movement within the plate pack.
Cleaning Chemical name, concentration, temperature, contact time, and frequency The cleaning procedure may be more demanding than normal operation.
System changes Changes to fluids, inhibitors, cleaning agents, operating temperature, or duty cycle A previous EPDM specification may no longer match the revised service.
Material comparison

EPDM, NBR, or FKM?

Elastomer selection should follow the complete process chemistry rather than gasket color, brand name, or temperature rating alone.

EPDM

Commonly considered for water, hot-water, HVAC, and compatible aqueous media. Generally unsuitable for hydrocarbon oils and fuels.

NBR

Commonly evaluated for selected oils, greases, hydraulic fluids, and industrial utilities. Fluid formulation and additives require confirmation.

FKM

Often evaluated for selected hydrocarbons, oils, chemicals, and elevated-temperature duties. It is not automatically preferable for water service.

Changing from NBR or FKM to EPDM requires a new compatibility review covering both circuits, process additives, possible contamination, and all cleaning media.
Dimensional compatibility

The EPDM Profile Must Match the Sondex Plate

Sealing Path

The field gasket, port rings, diagonal sections, and vent paths must follow the complete plate groove without gaps or distortion.

Retention Design

Clip-on, snap-in, inserted, tabbed, or glued features must correspond to the identified Sondex plate configuration.

Compression Profile

The gasket cross-section and profile height must support uniform contact at the approved plate-pack closing position.

Similar outside dimensions do not prove compatibility. Port seals, diagonal sections, vent positions, clips, tabs, and profile height must also be compared.
Identification workflow

How to Confirm a Sondex EPDM Gasket

Identify the Exchanger

Provide the Sondex model, nameplate photograph, serial information, and available maintenance records.

Identify the Plate

Send plate markings, overall dimensions, port diameter, and horizontal and vertical port-center distances.

Document the Gasket

Photograph an intact gasket from both sides, including ports, diagonals, vents, clips, tabs, and markings.

Confirm Water Chemistry

List both fluids, glycol type, concentration, inhibitors, treatment chemicals, and possible contaminants.

State Operating Conditions

Include temperatures, pressures, pump cycles, cleaning media, contact time, and cleaning frequency.

Define the Order

Confirm plate quantity, special gasket positions, spare allowance, labeling, packaging, and destination.

Maintenance and installation

Protect the New EPDM Gaskets During Assembly

Before Installation

  • Compare the new and reference profiles completely
  • Inspect plate grooves, ports, and edges for damage
  • Remove deposits, oil, old elastomer, and adhesive
  • Check retaining clips, tabs, and insertion points
  • Verify plate sequence and gasket orientation

During Assembly

  • Seat the gasket without stretching or twisting
  • Check port rings, diagonal seals, and vents
  • Keep the plate pack aligned during tightening
  • Compress the frame evenly using the approved procedure
  • Do not use over-tightening to correct a mismatch
Oil-based cleaners, lubricants, and assembly products should not contact EPDM unless their compatibility with the specified compound has been confirmed.
Production and order control

EPDM Gasket Sets for Maintenance and Distribution

Manufacturing and Inspection

WTSML operates a 3,500 m² facility with rubber molding, precision stamping, CNC machining, and final-inspection workshops. Production is managed under an ISO 9001-certified quality management system.

  • Reference profile and retaining features checked before production
  • Material and order identification maintained during processing
  • Visual and dimensional checks completed before packing

Order Organization

Gaskets can be grouped by exchanger, plate pack, maintenance set, or distributor purchase-order line.

  • Separate labels for mixed profiles or materials
  • Complete-set packing for planned maintenance
  • Confirmed private-label and customized packaging options
Material and purchasing questions

Sondex EPDM Gasket FAQ

What applications are Sondex EPDM gaskets commonly used for?

EPDM is commonly considered for water, hot-water, HVAC, and compatible aqueous duties. Final selection requires the exact fluid composition, additives, temperatures, pressure, and cleaning conditions.

Can Sondex EPDM gaskets be used with glycol-water mixtures?

They may be suitable for selected glycol-water formulations. Provide the glycol type, concentration, inhibitor package, temperatures, and cleaning chemicals because commercial formulations can differ.

Are EPDM gaskets suitable for oil or fuel service?

EPDM is generally unsuitable for hydrocarbon oils and fuels. Provide the exact fluid and operating conditions so NBR, FKM, or another compound can be evaluated where appropriate.

Is the Sondex exchanger model enough to select an EPDM gasket?

Not always. Plate variants, special positions, and retention designs may differ. Include plate markings, dimensions, gasket photos, and service data to confirm dimensional and material compatibility.

Can NBR or FKM be replaced with EPDM?

A substitution may be considered only after reviewing both process circuits, additives, contaminants, temperatures, pressure, and cleaning chemicals. The gasket profile must also match the plate.

Are these original Sondex EPDM gaskets?

No. They are independently manufactured replacement gaskets intended for confirmed compatible Sondex gasketed plate heat exchanger configurations. The Sondex name is used only to identify compatibility requirements.

Confirm EPDM Suitability and Gasket Fit

Send the Sondex model, plate and gasket photos, dimensions, water or glycol formulation, additives, temperatures, pressures, cleaning conditions, quantity, and destination.

Check EPDM Compatibility & Get a Quote

Hot Tags: sondex epdm gaskets, China sondex epdm gaskets manufacturers, suppliers, Sondex Compatible Gaskets, Sondex EPDM Gaskets, sondex gaskets, Sondex Plate Heat Exchanger Gaskets, Sondex Replacement Gaskets, Sondex Viton Gaskets

Send Inquiry
Send Inquiry